thanks, please write instalation by users new.
chan_dongle
Good morning, I just followed the instructions of the post that explains it, what happens is that I had a problem with the audio in the calls and I solved it by downloading a firmware version for my modem from another model with the same chip so that the voice function. I have a Huawei e156G modem, and I put the E160Update_11.609.10.02.432.B418.exe firmware version of an e160 model that carries the same chip.
Thank you all for your help, let's keep growing ...
hi. my issabel is: Asterisk 13.22.0 built by issabel @ issabeldev8 on a x86_64 running Linux on 2018-08-30 13:58:00 UTC
but when I execute the command: rpm -ivh http://download.kingtelecom.com.br/download/chan_dongle-asterisk-11.25-0-rev34.x86_64.rpm
Error: Dependency error:
asterisk-devel is required by chan_dongle-asterisk-11.25.0-rev34.x86_64
I run yum install asterisk-devel, the server is reinstalled, I return to give it to download the program and I get dependency error again.
could you help me?
asterisk 13 your issabelpbx, and install asterisk11 dongle?
hi my issabel is:
[root@issabel etc]# rasterisk -x "core show version"
Asterisk 13.22.0 built by issabel @ issabeldev8 on a x86_64 running Linux on 2018-08-30 13:58:00 UTC
and I want to install a huawei mobile broadband e173
[root@issabel etc]# lsusb
Bus 001 Device 007: ID 12d1:140c Huawei Technologies Co., Ltd. E180v
I want chan dongle to work
can you help?
chan_dongle-asterisk-11.25.0-rev34.x86_64
it does not work
[root@issabel etc]# rpm -ivh http://download.kingtelecom.com.br/download/chan_dongle-asterisk-11.25-0-rev34.x86_64.rpm
Recuperando http://download.kingtelecom.com.br/download/chan_dongle-asterisk-11.25-0-rev34.x86_64.rpm
Error: Dependency error:
asterisk-devel is required by chan_dongle-asterisk-11.25.0-rev34.x86_64
the version package is chan_dongle-asterisk-11.25.0-rev34.x86_64 (asterisk11) your server is asterisk13.
not working different versions.
Os is centos 7, package install os.
- Edited
hello darkside , I'm very new to all of pbx issabel, I'm trying to connect my huawei e1752 to receive and make calls. I followed your instructions but I could not connect the device. my huawei e1752, can make and receive calls from Mobile Partner, I've already done it. but I want to make a telephone exchange with Issabel to call and receive. I'd appreciate your help
issabelPBX * CLI> dongle show device state dongle0
-------------- Status -------------
Device: dongle0
State: Not connected Start scheduled
Audio: / dev / ttyUSB1
Data: / dev / ttyUSB2
Voice: No
SMS: No
Manufacturer:
Model:
Firmware:
IMEI:
IMSI:
GSM Registration Status: Unknown
RSSI: 0, <= -113 dBm
Mode: No Service
Submode: No service
Provider Name: NONE
Location area code:
Cell ID:
Subscriber Number: Unknown
SMS Service Center:
Use UCS-2 encoding: No
USSD use 7 bit encoding: No
USSD use UCS-2 decoding: Yes
Tasks in queue: 0
Commands in queue: 0
Call Waiting: Disabled
Current device state: stop
Desired device state: start
When change state: now
Calls / Channels: 0
Active: 0
Held: 0
Dialing: 0
Alerting: 0
Incoming: 0
Waiting: 0
Releasing: 0
Initializing: 0
VERSION ISSABEL
Kernel
Linux (x86_64) -3.10.0-862.6.3.el7.x86_64
Issabel
issabel-4.0.0-1
issabel-addons-4.0.0-4
issabel-agenda-4.0.0-3
issabel-asterisk-sounds-1.2.3-2
issabel-callcenter-4.0.0-4
issabel-email_admin-4.0.0-2
issabel-endpointconfig2-4.0.0-3
issabel-extras-4.0.0-4
issabel-fax-4.0.0-1
issabel-firstboot-4.0.0-3
issabel-framework-4.0.0-6
issabel-my_extension-4.0.0-1
issabel-pbx-4.0.0-5
issabel-portknock-4.0.0-2
issabel-reports-4.0.0-3
issabel-security-4.0.0-6
issabel-system-4.0.0-7
RoundCubeMail
RoundCubeMail-0.3.1-13
Mail
postfix-2.10.1-6.el7
cyrus-imapd-2.4.17-13.el7
IM
openfire- (not installed) -
IssablPBX
issabelPBX-2.11.0-47
Asterisk
asterisk11-11.25.3-3.el7.centos
asterisk11-addons-11.25.3-3.el7.centos
asterisk11-devel-11.25.3-3.el7.centos
asterisk-es-sounds-1.0.0-0.el7.centos
asterisk-fr-sounds-1.0.0-0.el7.centos
asterisk-perl-1.03-1.el7.centos
FAX
hylafax-4.3.11-1rh7
iaxmodem-1.3.0-2.el7.centos
DRIVERS
dahdi-2.11.1-1.el7.centos
rhino-0.99.7-0
wanpipe-util-7.0.25.1-0
balkin77 you can help? here my post https://forum.issabel.org/d/405-chan-dongle/21
- Edited
ggrraay the PuTTY console is great. I just installed it.
here what is requested
[root@issabel ~]# lsusb
Bus 001 Device 003: ID 0bda:8179 Realtek Semiconductor Corp. RTL8188EUS 802.11n Wireless Network Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[root@issabel ~]# ls /dev/ttyUSB
ls: no se puede acceder a /dev/ttyUSB: No existe el fichero o el directorio
[root@issabel ~]#
emendoza I tried chan_dongle in VirtualBox, sometimes it works, sometimes it doesn't work for 5 or 10 minutes, then it's again fine. Then I installed issabel on a real hardware and all issues just vanished. But VirtualBox is fine for tests perhaps.
To make modem appear you have to "passthrough" modem device in VirtualBox. It's usb icon at the bottom. You need device filter like this https://imgur.com/a/ZlPcNZX. Then modem should appear in lsusb
- Edited
Thank you ggrraay . After a tough battle, I managed to get virtualbox to show the Huawei e1752 device. Solution: remove all device drivers, mobile partner and datacard. then install the default drivers of the e1752 CD that run when you connect the device to the USB port and then EUREKA! my device is shown in the virtualbox as usb. I will continue showing results of the commands:
lsusb
ls / dev / ttyUSB *
[root @ issabel ~] # lsusb
Bus 001 Device 002: ID 12d1: 1406 Huawei Technologies Co., Ltd. E1750
Bus 001 Device 001: ID 1d6b: 0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b: 0001 Linux Foundation 1.1 root hub
[root @ issabel ~] # ls / dev / ttyUSB *
/ dev / ttyUSB0 / dev / ttyUSB1
I will continue trying the instructions of darkside