Issabel ISO (Latest): Download Here
Cloud Services: User Portal - Quick Guide
News: Telegram channel
Become a Patron!
8 months later

Good morning, I installed chan-dongle in issabel 4, following the steps above, preo when I enter the console asterisk and charge the module returns this error, someone can help me.
I have tried several things, I have searched for the imsi, I can not find it, I have also checked that this USB modem is unlocked, I have checked that it has coverage, and that's fine, as the error said:
ERROR [3573]: at_response.c: 364 at_response_error: [dongle0] Getting IMSI number failed

Thanks for the help you can give me

    Good afternoon, I answer myself, the problem had it in the SIM, I activated it and I have modified the modem firmware to a more modern version, now I get calls but I have a big problem, nothing is heard, apparently there is some problem with the codec negotiation, I get this error:

    WARNING[4794][C-00000009]: channel.c:1002 channel_indicate: [Dongle/dongle0-0100000008] Don't know how to indicate condition 22
    [2018-04-23 14:14:43] WARNING[4794][C-00000009]: channel.c:1002 channel_indicate: [Dongle/dongle0-0100000008] Don't know how to indicate condition 22
    [2018-04-23 14:14:43] WARNING[4794][C-00000009]: channel.c:1002 channel_indicate: [Dongle/dongle0-0100000008] Don't know how to indicate condition 33
    [2018-04-23 14:14:44] WARNING[4794][C-00000009]: channel.c:1002 channel_indicate: [Dongle/dongle0-0100000008] Don't know how to indicate condition 33

    i think that it is for voice codecs, someone with same issue?

      Good morning, attached asterisk capture of a call made from issabel by a dongle, the call is made but I do not have audio in any way.

      -- Called dongle/dongle0/655463605
      -- Dongle/dongle0-0100000003 is making progress passing it to SIP/1101-00000001
      [2018-04-26 11:53:11] ERROR[4423]: at_response.c:472 at_response_error: [dongle0] ATDDSETEX failed
      > 0x7fb224033d70 -- Strict RTP switching to RTP remote address 172.16.0.211:4000 as source
      > 0x7fb224033d70 -- Strict RTP learning complete - Locking on source address 172.16.0.211:4000
      == Everyone is busy/congested at this time (1:1/0/0)
      -- Executing [s@macro-dialout-trunk:31] NoOp("SIP/1101-00000001", "Dial failed for some reason with DIALSTATUS = BUSY and HANGUPCAUSE = 17") in new stack
      -- Executing [s@macro-dialout-trunk:32] GotoIf("SIP/1101-00000001", "0?continue,1:s-BUSY,1") in new stack
      -- Goto (macro-dialout-trunk,s-BUSY,1)
      -- Executing [s-BUSY@macro-dialout-trunk:1] NoOp("SIP/1101-00000001", "Dial failed due to trunk reporting BUSY - giving up") in new stack
      -- Executing [s-BUSY@macro-dialout-trunk:2] PlayTones("SIP/1101-00000001", "busy") in new stack
      -- Executing [s-BUSY@macro-dialout-trunk:3] Busy("SIP/1101-00000001", "20") in new stack
      == Spawn extension (macro-dialout-trunk, s-BUSY, 3) exited non-zero on 'SIP/1101-00000001' in macro 'dialout-trunk'
      == Spawn extension (from-internal, 655463605, 5) exited non-zero on 'SIP/1101-00000001'
      -- Executing [h@from-internal:1] Hangup("SIP/1101-00000001", "") in new stack
      == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/1101-00000001'
      -- Executing [1101@default:1] Set("Dongle/dongle0-0100000004", "RINGTIMER=15") in new stack
      -- Executing [1101@default:2] Macro("Dongle/dongle0-0100000004", "exten-vm,novm,1101,0,0,0") in new stack
      -- Executing [s@macro-exten-vm:1] Macro("Dongle/dongle0-0100000004", "user-callerid,") in new stack
      -- Executing [s@macro-user-callerid:1] Set("Dongle/dongle0-0100000004", "TOUCH_MONITOR=1524736430.10") in new stack
      -- Executing [s@macro-user-callerid:2] Set("Dongle/dongle0-0100000004", "AMPUSER=961152743") in new stack
      -- Executing [s@macro-user-callerid:3] GotoIf("Dongle/dongle0-0100000004", "0?report") in new stack
      -- Executing [s@macro-user-callerid:4] ExecIf("Dongle/dongle0-0100000004", "1?Set(REALCALLERIDNUM=961152743)") in new stack
      -- Executing [s@macro-user-callerid:5] Set("Dongle/dongle0-0100000004", "AMPUSER=") in new stack
      -- Executing [s@macro-user-callerid:6] GotoIf("Dongle/dongle0-0100000004", "0?limit") in new stack
      -- Executing [s@macro-user-callerid:7] Set("Dongle/dongle0-0100000004", "AMPUSERCIDNAME=") in new stack
      -- Executing [s@macro-user-callerid:8] GotoIf("Dongle/dongle0-0100000004", "1?report") in new stack
      -- Goto (macro-user-callerid,s,15)
      -- Executing [s@macro-user-callerid:15] GotoIf("Dongle/dongle0-0100000004", "0?continue") in new stack
      -- Executing [s@macro-user-callerid:16] Set("Dongle/dongle0-0100000004", "
      TTL=64") in new stack
      -- Executing [s@macro-user-callerid:17] GotoIf("Dongle/dongle0-0100000004", "1?continue") in new stack
      -- Goto (macro-user-callerid,s,28)
      -- Executing [s@macro-user-callerid:28] Set("Dongle/dongle0-0100000004", "CALLERID(number)=961152743") in new stack
      -- Executing [s@macro-user-callerid:29] Set("Dongle/dongle0-0100000004", "CALLERID(name)=dongle0") in new stack
      -- Executing [s@macro-user-callerid:30] Set("Dongle/dongle0-0100000004", "CDR(cnum)=961152743") in new stack
      -- Executing [s@macro-user-callerid:31] Set("Dongle/dongle0-0100000004", "CDR(cnam)=dongle0") in new stack
      -- Executing [s@macro-user-callerid:32] Set("Dongle/dongle0-0100000004", "CHANNEL(language)=en") in new stack
      -- Executing [s@macro-exten-vm:2] Set("Dongle/dongle0-0100000004", "RingGroupMethod=none") in new stack
      -- Executing [s@macro-exten-vm:3] Set("Dongle/dongle0-0100000004", "EXTTOCALL=1101") in new stack
      -- Executing [s@macro-exten-vm:4] Set("Dongle/dongle0-0100000004", "
      PICKUPMARK=1101") in new stack
      -- Executing [s@macro-exten-vm:5] Set("Dongle/dongle0-0100000004", "RT=") in new stack
      -- Executing [s@macro-exten-vm:6] Gosub("Dongle/dongle0-0100000004", "sub-record-check,s,1(exten,1101,)") in new stack
      -- Executing [s@sub-record-check:1] Set("Dongle/dongle0-0100000004", "REC_POLICY_MODE_SAVE=") in new stack
      -- Executing [s@sub-record-check:2] GotoIf("Dongle/dongle0-0100000004", "1?check") in new stack
      -- Goto (sub-record-check,s,7)
      -- Executing [s@sub-record-check:7] Set("Dongle/dongle0-0100000004", "MON_FMT=WAV") in new stack
      -- Executing [s@sub-record-check:8] GotoIf("Dongle/dongle0-0100000004", "1?next") in new stack
      -- Goto (sub-record-check,s,11)
      -- Executing [s@sub-record-check:11] ExecIf("Dongle/dongle0-0100000004", "0?Return()") in new stack
      -- Executing [s@sub-record-check:12] ExecIf("Dongle/dongle0-0100000004", "0?Set(
      REC_POLICY_MODE=)") in new stack
      -- Executing [s@sub-record-check:13] GotoIf("Dongle/dongle0-0100000004", "0?exten,1") in new stack
      -- Executing [s@sub-record-check:14] Set("Dongle/dongle0-0100000004", "REC_STATUS=INITIALIZED") in new stack
      -- Executing [s@sub-record-check:15] Set("Dongle/dongle0-0100000004", "NOW=1524736430") in new stack
      -- Executing [s@sub-record-check:16] Set("Dongle/dongle0-0100000004", "
      DAY=26") in new stack
      -- Executing [s@sub-record-check:17] Set("Dongle/dongle0-0100000004", "MONTH=04") in new stack
      -- Executing [s@sub-record-check:18] Set("Dongle/dongle0-0100000004", "
      YEAR=2018") in new stack
      -- Executing [s@sub-record-check:19] Set("Dongle/dongle0-0100000004", "TIMESTR=20180426-115350") in new stack
      -- Executing [s@sub-record-check:20] Set("Dongle/dongle0-0100000004", "
      FROMEXTEN=961152743") in new stack
      -- Executing [s@sub-record-check:21] Set("Dongle/dongle0-0100000004", "CALLFILENAME=exten-1101-961152743-20180426-115350-1524736430.10") in new stack
      -- Executing [s@sub-record-check:22] Goto("Dongle/dongle0-0100000004", "exten,1") in new stack
      -- Goto (sub-record-check,exten,1)
      -- Executing [exten@sub-record-check:1] GotoIf("Dongle/dongle0-0100000004", "0?callee") in new stack
      -- Executing [exten@sub-record-check:2] Set("Dongle/dongle0-0100000004", "
      REC_POLICY_MODE=dontcare") in new stack
      -- Executing [exten@sub-record-check:3] GotoIf("Dongle/dongle0-0100000004", "1?caller") in new stack
      -- Goto (sub-record-check,exten,10)
      -- Executing [exten@sub-record-check:10] Set("Dongle/dongle0-0100000004", "REC_POLICY_MODE=") in new stack
      -- Executing [exten@sub-record-check:11] GosubIf("Dongle/dongle0-0100000004", "0?record,1(exten,1101,961152743)") in new stack
      -- Executing [exten@sub-record-check:12] Return("Dongle/dongle0-0100000004", "") in new stack
      -- Executing [s@macro-exten-vm:7] Macro("Dongle/dongle0-0100000004", "dial-one,,Ttr,1101") in new stack
      -- Executing [s@macro-dial-one:1] Set("Dongle/dongle0-0100000004", "DEXTEN=1101") in new stack
      -- Executing [s@macro-dial-one:2] Set("Dongle/dongle0-0100000004", "DIALSTATUS_CW=") in new stack
      -- Executing [s@macro-dial-one:3] GosubIf("Dongle/dongle0-0100000004", "0?screen,1()") in new stack
      -- Executing [s@macro-dial-one:4] GosubIf("Dongle/dongle0-0100000004", "0?cf,1()") in new stack
      -- Executing [s@macro-dial-one:5] GotoIf("Dongle/dongle0-0100000004", "1?skip1") in new stack
      -- Goto (macro-dial-one,s,8)
      -- Executing [s@macro-dial-one:8] GotoIf("Dongle/dongle0-0100000004", "0?nodial") in new stack
      -- Executing [s@macro-dial-one:9] GotoIf("Dongle/dongle0-0100000004", "0?continue") in new stack
      -- Executing [s@macro-dial-one:10] Set("Dongle/dongle0-0100000004", "EXTHASCW=ENABLED") in new stack
      -- Executing [s@macro-dial-one:11] GotoIf("Dongle/dongle0-0100000004", "0?next1:cwinusebusy") in new stack
      -- Goto (macro-dial-one,s,23)
      -- Executing [s@macro-dial-one:23] GotoIf("Dongle/dongle0-0100000004", "1?next3:continue") in new stack
      -- Goto (macro-dial-one,s,24)
      -- Executing [s@macro-dial-one:24] ExecIf("Dongle/dongle0-0100000004", "0?Set(DIALSTATUS_CW=BUSY)") in new stack
      -- Executing [s@macro-dial-one:25] GotoIf("Dongle/dongle0-0100000004", "0?nodial") in new stack
      -- Executing [s@macro-dial-one:26] GosubIf("Dongle/dongle0-0100000004", "1?dstring,1():dlocal,1()") in new stack
      -- Executing [dstring@macro-dial-one:1] Set("Dongle/dongle0-0100000004", "DSTRING=") in new stack
      -- Executing [dstring@macro-dial-one:2] Set("Dongle/dongle0-0100000004", "DEVICES=1101") in new stack
      -- Executing [dstring@macro-dial-one:3] ExecIf("Dongle/dongle0-0100000004", "0?Return()") in new stack
      -- Executing [dstring@macro-dial-one:4] ExecIf("Dongle/dongle0-0100000004", "0?Set(DEVICES=101)") in new stack
      -- Executing [dstring@macro-dial-one:5] Set("Dongle/dongle0-0100000004", "LOOPCNT=1") in new stack
      -- Executing [dstring@macro-dial-one:6] Set("Dongle/dongle0-0100000004", "ITER=1") in new stack
      -- Executing [dstring@macro-dial-one:7] Set("Dongle/dongle0-0100000004", "THISDIAL=SIP/1101") in new stack
      -- Executing [dstring@macro-dial-one:8] GosubIf("Dongle/dongle0-0100000004", "1?zap2dahdi,1()") in new stack
      -- Executing [zap2dahdi@macro-dial-one:1] ExecIf("Dongle/dongle0-0100000004", "0?Return()") in new stack
      -- Executing [zap2dahdi@macro-dial-one:2] Set("Dongle/dongle0-0100000004", "NEWDIAL=") in new stack
      -- Executing [zap2dahdi@macro-dial-one:3] Set("Dongle/dongle0-0100000004", "LOOPCNT2=1") in new stack
      -- Executing [zap2dahdi@macro-dial-one:4] Set("Dongle/dongle0-0100000004", "ITER2=1") in new stack
      -- Executing [zap2dahdi@macro-dial-one:5] Set("Dongle/dongle0-0100000004", "THISPART2=SIP/1101") in new stack
      -- Executing [zap2dahdi@macro-dial-one:6] ExecIf("Dongle/dongle0-0100000004", "0?Set(THISPART2=DAHDI/1101)") in new stack
      -- Executing [zap2dahdi@macro-dial-one:7] Set("Dongle/dongle0-0100000004", "NEWDIAL=SIP/1101&") in new stack
      -- Executing [zap2dahdi@macro-dial-one:8] Set("Dongle/dongle0-0100000004", "ITER2=2") in new stack
      -- Executing [zap2dahdi@macro-dial-one:9] GotoIf("Dongle/dongle0-0100000004", "0?begin2") in new stack
      -- Executing [zap2dahdi@macro-dial-one:10] Set("Dongle/dongle0-0100000004", "THISDIAL=SIP/1101") in new stack
      -- Executing [zap2dahdi@macro-dial-one:11] Return("Dongle/dongle0-0100000004", "") in new stack
      -- Executing [dstring@macro-dial-one:9] Set("Dongle/dongle0-0100000004", "DSTRING=SIP/1101&") in new stack
      -- Executing [dstring@macro-dial-one:10] Set("Dongle/dongle0-0100000004", "ITER=2") in new stack
      -- Executing [dstring@macro-dial-one:11] GotoIf("Dongle/dongle0-0100000004", "0?begin") in new stack
      -- Executing [dstring@macro-dial-one:12] Set("Dongle/dongle0-0100000004", "DSTRING=SIP/1101") in new stack
      -- Executing [dstring@macro-dial-one:13] Return("Dongle/dongle0-0100000004", "") in new stack
      -- Executing [s@macro-dial-one:27] GotoIf("Dongle/dongle0-0100000004", "0?nodial") in new stack
      -- Executing [s@macro-dial-one:28] GotoIf("Dongle/dongle0-0100000004", "0?skiptrace") in new stack
      -- Executing [s@macro-dial-one:29] GosubIf("Dongle/dongle0-0100000004", "1?ctset,1():ctclear,1()") in new stack
      -- Executing [ctset@macro-dial-one:1] Set("Dongle/dongle0-0100000004", "DB(CALLTRACE/1101)=961152743") in new stack
      -- Executing [ctset@macro-dial-one:2] Return("Dongle/dongle0-0100000004", "") in new stack
      -- Executing [s@macro-dial-one:30] Set("Dongle/dongle0-0100000004", "D_OPTIONS=Ttr") in new stack
      -- Executing [s@macro-dial-one:31] ExecIf("Dongle/dongle0-0100000004", "0?SIPAddHeader(Alert-Info: )") in new stack
      -- Executing [s@macro-dial-one:32] ExecIf("Dongle/dongle0-0100000004", "0?SIPAddHeader()") in new stack
      -- Executing [s@macro-dial-one:33] ExecIf("Dongle/dongle0-0100000004", "0?Set(CHANNEL(musicclass)=)") in new stack
      -- Executing [s@macro-dial-one:34] GosubIf("Dongle/dongle0-0100000004", "0?qwait,1()") in new stack
      -- Executing [s@macro-dial-one:35] Set("Dongle/dongle0-0100000004", "
      CWIGNORE=") in new stack
      -- Executing [s@macro-dial-one:36] Set("Dongle/dongle0-0100000004", "__KEEPCID=TRUE") in new stack
      -- Executing [s@macro-dial-one:37] GotoIf("Dongle/dongle0-0100000004", "0?usegoto,1") in new stack
      -- Executing [s@macro-dial-one:38] GotoIf("Dongle/dongle0-0100000004", "1?godial") in new stack
      -- Goto (macro-dial-one,s,43)
      -- Executing [s@macro-dial-one:43] Dial("Dongle/dongle0-0100000004", "SIP/1101,,Ttr") in new stack
      == Using SIP RTP TOS bits 184
      == Using SIP RTP CoS mark 5
      -- Called SIP/1101
      [2018-04-26 11:53:50] WARNING[4440][C-00000006]: channel.c:1002 channel_indicate: [Dongle/dongle0-0100000004] Don't know how to indicate condition 22
      [2018-04-26 11:53:50] WARNING[4440][C-00000006]: channel.c:1002 channel_indicate: [Dongle/dongle0-0100000004] Don't know how to indicate condition 22
      [2018-04-26 11:53:50] WARNING[4440][C-00000006]: channel.c:1002 channel_indicate: [Dongle/dongle0-0100000004] Don't know how to indicate condition 33
      [2018-04-26 11:53:51] WARNING[4440][C-00000006]: channel.c:1002 channel_indicate: [Dongle/dongle0-0100000004] Don't know how to indicate condition 33
      -- SIP/1101-00000002 is ringing
      [2018-04-26 11:53:51] WARNING[4440][C-00000006]: channel.c:1002 channel_indicate: [Dongle/dongle0-0100000004] Don't know how to indicate condition 33
      -- SIP/1101-00000002 is ringing
      > 0x7fb21c032730 -- Strict RTP learning after remote address set to: 172.16.0.211:4002
      [2018-04-26 11:54:02] WARNING[4440][C-00000006]: channel.c:1002 channel_indicate: [Dongle/dongle0-0100000004] Don't know how to indicate condition 33
      [2018-04-26 11:54:02] WARNING[4440][C-00000006]: channel.c:1002 channel_indicate: [Dongle/dongle0-0100000004] Don't know how to indicate condition 22
      -- SIP/1101-00000002 answered Dongle/dongle0-0100000004
      > 0x7fb21c032730 -- Strict RTP switching to RTP remote address 172.16.0.211:4002 as source
      [2018-04-26 11:54:02] ERROR[4423]: at_response.c:472 at_response_error: [dongle0] ATDDSETEX failed
      > 0x7fb21c032730 -- Strict RTP learning complete - Locking on source address 172.16.0.211:4002
      -- Executing [h@macro-dial-one:1] Macro("Dongle/dongle0-0100000004", "hangupcall,") in new stack
      -- Executing [s@macro-hangupcall:1] GotoIf("Dongle/dongle0-0100000004", "1?endmixmoncheck") in new stack
      -- Goto (macro-hangupcall,s,20)
      -- Executing [s@macro-hangupcall:20] NoOp("Dongle/dongle0-0100000004", "End of MIXMON check") in new stack
      -- Executing [s@macro-hangupcall:21] GotoIf("Dongle/dongle0-0100000004", "1?nomeetmemon") in new stack
      -- Goto (macro-hangupcall,s,39)
      -- Executing [s@macro-hangupcall:39] NoOp("Dongle/dongle0-0100000004", "End of MEETME check") in new stack
      -- Executing [s@macro-hangupcall:40] GotoIf("Dongle/dongle0-0100000004", "1?noautomon") in new stack
      -- Goto (macro-hangupcall,s,45)
      -- Executing [s@macro-hangupcall:45] NoOp("Dongle/dongle0-0100000004", "TOUCH_MONITOR_OUTPUT=") in new stack
      -- Executing [s@macro-hangupcall:46] GotoIf("Dongle/dongle0-0100000004", "1?noautomon2") in new stack
      -- Goto (macro-hangupcall,s,52)
      -- Executing [s@macro-hangupcall:52] NoOp("Dongle/dongle0-0100000004", "MONITOR_FILENAME=") in new stack
      -- Executing [s@macro-hangupcall:53] GotoIf("Dongle/dongle0-0100000004", "1?noautomon3") in new stack
      -- Goto (macro-hangupcall,s,59)
      -- Executing [s@macro-hangupcall:59] NoOp("Dongle/dongle0-0100000004", "MIXMONITOR_FILENAME=") in new stack
      -- Executing [s@macro-hangupcall:60] GotoIf("Dongle/dongle0-0100000004", "1?noautomon4") in new stack
      -- Goto (macro-hangupcall,s,62)
      -- Executing [s@macro-hangupcall:62] NoOp("Dongle/dongle0-0100000004", "ONETOUCH_RECFILE=") in new stack
      -- Executing [s@macro-hangupcall:63] NoOp("Dongle/dongle0-0100000004", "CDR recordingfile set to: ") in new stack
      -- Executing [s@macro-hangupcall:64] GotoIf("Dongle/dongle0-0100000004", "1?skiprg") in new stack
      -- Goto (macro-hangupcall,s,67)
      -- Executing [s@macro-hangupcall:67] GotoIf("Dongle/dongle0-0100000004", "1?skipblkvm") in new stack
      -- Goto (macro-hangupcall,s,70)
      -- Executing [s@macro-hangupcall:70] GotoIf("Dongle/dongle0-0100000004", "1?theend") in new stack
      -- Goto (macro-hangupcall,s,72)
      -- Executing [s@macro-hangupcall:72] AGI("Dongle/dongle0-0100000004", "hangup.agi") in new stack
      -- Launched AGI Script /var/lib/asterisk/agi-bin/hangup.agi
      -- <Dongle/dongle0-0100000004>AGI Script hangup.agi completed, returning 0
      -- Executing [s@macro-hangupcall:73] Hangup("Dongle/dongle0-0100000004", "") in new stack
      == Spawn extension (macro-hangupcall, s, 73) exited non-zero on 'Dongle/dongle0-0100000004' in macro 'hangupcall'
      == Spawn extension (macro-dial-one, h, 1) exited non-zero on 'Dongle/dongle0-0100000004'
      == Spawn extension (macro-dial-one, s, 43) exited non-zero on 'Dongle/dongle0-0100000004' in macro 'dial-one'
      == Spawn extension (macro-exten-vm, s, 7) exited non-zero on 'Dongle/dongle0-0100000004' in macro 'exten-vm'
      == Spawn extension (default, 1101, 2) exited non-zero on 'Dongle/dongle0-0100000004'
      -- Remote UNIX connection
      -- Remote UNIX connection disconnected
      issabelPBX*CLI>

      and when I look at the characteristics of the dongle with dongle show device state dongle0 answers me this:

      issabelPBX*CLI> dongle show device state dongle0
      -------------- Status -------------
      Device : dongle0
      State : Free
      Audio : /dev/ttyUSB0
      Data : /dev/ttyUSB1
      Voice : Yes
      SMS : Yes
      Manufacturer : huawei
      Model : E156G
      Firmware : 11.608.08.81.00
      IMEI : 357133031008707
      IMSI : 214075525622487
      GSM Registration Status : Registered, home network
      RSSI : 16, -81 dBm
      Mode : No Service
      Submode : No service
      Provider Name : FFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
      Location area code : 1236
      Cell ID : 1163
      Subscriber Number : Unknown
      SMS Service Center : +34609090909
      Use UCS-2 encoding : Yes
      USSD use 7 bit encoding : No
      USSD use UCS-2 decoding : Yes
      Tasks in queue : 0
      Commands in queue : 0
      Call Waiting : Disabled
      Current device state : start
      Desired device state : start
      When change state : now
      Calls/Channels : 0
      Active : 0
      Held : 0
      Dialing : 0
      Alerting : 0
      Incoming : 0
      Waiting : 0
      Releasing : 0
      Initializing : 0

      issabelPBX*CLI>

      Thanks for the help you can give me

        15 days later

        My Issabel is dongled!!!!!!

        thanks.

          thanks, please write instalation by users new.

            Good morning, I just followed the instructions of the post that explains it, what happens is that I had a problem with the audio in the calls and I solved it by downloading a firmware version for my modem from another model with the same chip so that the voice function. I have a Huawei e156G modem, and I put the E160Update_11.609.10.02.432.B418.exe firmware version of an e160 model that carries the same chip.

            Thank you all for your help, let's keep growing ...

            7 months later

            darkside

            hi. my issabel is: Asterisk 13.22.0 built by issabel @ issabeldev8 on a x86_64 running Linux on 2018-08-30 13:58:00 UTC

            but when I execute the command: rpm -ivh http://download.kingtelecom.com.br/download/chan_dongle-asterisk-11.25-0-rev34.x86_64.rpm

            Error: Dependency error:
            asterisk-devel is required by chan_dongle-asterisk-11.25.0-rev34.x86_64

            I run yum install asterisk-devel, the server is reinstalled, I return to give it to download the program and I get dependency error again.

            could you help me?

            asterisk 13 your issabelpbx, and install asterisk11 dongle?

              dariohimo

              hi my issabel is:
              [root@issabel etc]# rasterisk -x "core show version"
              Asterisk 13.22.0 built by issabel @ issabeldev8 on a x86_64 running Linux on 2018-08-30 13:58:00 UTC

              and I want to install a huawei mobile broadband e173

              [root@issabel etc]# lsusb
              Bus 001 Device 007: ID 12d1:140c Huawei Technologies Co., Ltd. E180v
              I want chan dongle to work
              can you help?

                chan_dongle-asterisk-11.25.0-rev34.x86_64

                  the version package is chan_dongle-asterisk-11.25.0-rev34.x86_64 (asterisk11) your server is asterisk13.
                  not working different versions.
                  Os is centos 7, package install os.

                    dariohimo

                    There is a more current version for chan_dongle-asterisk-11.25.0-rev34.x86_64 (asterisk11).

                    to work with my server?

                      jlebr you have to compile chan_dongle for your asterisk (just google howto) or reinstall your issabel and choose asterisk11 during installation.

                        12 days later

                        hello darkside , I'm very new to all of pbx issabel, I'm trying to connect my huawei e1752 to receive and make calls. I followed your instructions but I could not connect the device. my huawei e1752, can make and receive calls from Mobile Partner, I've already done it. but I want to make a telephone exchange with Issabel to call and receive. I'd appreciate your help

                        issabelPBX * CLI> dongle show device state dongle0
                        -------------- Status -------------
                          Device: dongle0
                          State: Not connected Start scheduled
                          Audio: / dev / ttyUSB1
                          Data: / dev / ttyUSB2
                          Voice: No
                          SMS: No
                          Manufacturer:
                          Model:
                          Firmware:
                          IMEI:
                          IMSI:
                          GSM Registration Status: Unknown
                          RSSI: 0, <= -113 dBm
                          Mode: No Service
                          Submode: No service
                          Provider Name: NONE
                          Location area code:
                          Cell ID:
                          Subscriber Number: Unknown
                          SMS Service Center:
                          Use UCS-2 encoding: No
                          USSD use 7 bit encoding: No
                          USSD use UCS-2 decoding: Yes
                          Tasks in queue: 0
                          Commands in queue: 0
                          Call Waiting: Disabled
                          Current device state: stop
                          Desired device state: start
                          When change state: now
                          Calls / Channels: 0
                            Active: 0
                            Held: 0
                            Dialing: 0
                            Alerting: 0
                            Incoming: 0
                            Waiting: 0
                            Releasing: 0
                            Initializing: 0

                        VERSION ISSABEL

                        Kernel
                           Linux (x86_64) -3.10.0-862.6.3.el7.x86_64

                         Issabel
                           issabel-4.0.0-1
                           issabel-addons-4.0.0-4
                           issabel-agenda-4.0.0-3
                           issabel-asterisk-sounds-1.2.3-2
                           issabel-callcenter-4.0.0-4
                           issabel-email_admin-4.0.0-2
                           issabel-endpointconfig2-4.0.0-3
                           issabel-extras-4.0.0-4
                           issabel-fax-4.0.0-1
                           issabel-firstboot-4.0.0-3
                           issabel-framework-4.0.0-6
                           issabel-my_extension-4.0.0-1
                           issabel-pbx-4.0.0-5
                           issabel-portknock-4.0.0-2
                           issabel-reports-4.0.0-3
                           issabel-security-4.0.0-6
                           issabel-system-4.0.0-7

                         RoundCubeMail
                           RoundCubeMail-0.3.1-13

                         Mail
                           postfix-2.10.1-6.el7
                           cyrus-imapd-2.4.17-13.el7

                         IM
                           openfire- (not installed) -

                         IssablPBX
                           issabelPBX-2.11.0-47

                         Asterisk
                           asterisk11-11.25.3-3.el7.centos
                           asterisk11-addons-11.25.3-3.el7.centos
                           asterisk11-devel-11.25.3-3.el7.centos
                           asterisk-es-sounds-1.0.0-0.el7.centos
                           asterisk-fr-sounds-1.0.0-0.el7.centos
                           asterisk-perl-1.03-1.el7.centos

                         FAX
                           hylafax-4.3.11-1rh7
                           iaxmodem-1.3.0-2.el7.centos

                         DRIVERS
                           dahdi-2.11.1-1.el7.centos
                           rhino-0.99.7-0
                           wanpipe-util-7.0.25.1-0

                        ggrraay Hello thank you, I'm very new to Linux, but I'm learning. I like it. wait for me. trying to do what you asked me

                          ggrraay the PuTTY console is great. I just installed it.
                          here what is requested


                          [root@issabel ~]# lsusb
                          Bus 001 Device 003: ID 0bda:8179 Realtek Semiconductor Corp. RTL8188EUS 802.11n Wireless Network Adapter
                          Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
                          Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
                          [root@issabel ~]# ls /dev/ttyUSB
                          ls: no se puede acceder a /dev/ttyUSB
                          : No existe el fichero o el directorio
                          [root@issabel ~]#