Issabel ISO (Latest): Download Here
Cloud Services: User Portal - Quick Guide
News: Telegram channel
Become a Patron!

dariohimo

hi my issabel is:
[root@issabel etc]# rasterisk -x "core show version"
Asterisk 13.22.0 built by issabel @ issabeldev8 on a x86_64 running Linux on 2018-08-30 13:58:00 UTC

and I want to install a huawei mobile broadband e173

[root@issabel etc]# lsusb
Bus 001 Device 007: ID 12d1:140c Huawei Technologies Co., Ltd. E180v
I want chan dongle to work
can you help?

    chan_dongle-asterisk-11.25.0-rev34.x86_64

      the version package is chan_dongle-asterisk-11.25.0-rev34.x86_64 (asterisk11) your server is asterisk13.
      not working different versions.
      Os is centos 7, package install os.

        dariohimo

        There is a more current version for chan_dongle-asterisk-11.25.0-rev34.x86_64 (asterisk11).

        to work with my server?

          jlebr you have to compile chan_dongle for your asterisk (just google howto) or reinstall your issabel and choose asterisk11 during installation.

            12 days later

            hello darkside , I'm very new to all of pbx issabel, I'm trying to connect my huawei e1752 to receive and make calls. I followed your instructions but I could not connect the device. my huawei e1752, can make and receive calls from Mobile Partner, I've already done it. but I want to make a telephone exchange with Issabel to call and receive. I'd appreciate your help

            issabelPBX * CLI> dongle show device state dongle0
            -------------- Status -------------
              Device: dongle0
              State: Not connected Start scheduled
              Audio: / dev / ttyUSB1
              Data: / dev / ttyUSB2
              Voice: No
              SMS: No
              Manufacturer:
              Model:
              Firmware:
              IMEI:
              IMSI:
              GSM Registration Status: Unknown
              RSSI: 0, <= -113 dBm
              Mode: No Service
              Submode: No service
              Provider Name: NONE
              Location area code:
              Cell ID:
              Subscriber Number: Unknown
              SMS Service Center:
              Use UCS-2 encoding: No
              USSD use 7 bit encoding: No
              USSD use UCS-2 decoding: Yes
              Tasks in queue: 0
              Commands in queue: 0
              Call Waiting: Disabled
              Current device state: stop
              Desired device state: start
              When change state: now
              Calls / Channels: 0
                Active: 0
                Held: 0
                Dialing: 0
                Alerting: 0
                Incoming: 0
                Waiting: 0
                Releasing: 0
                Initializing: 0

            VERSION ISSABEL

            Kernel
               Linux (x86_64) -3.10.0-862.6.3.el7.x86_64

             Issabel
               issabel-4.0.0-1
               issabel-addons-4.0.0-4
               issabel-agenda-4.0.0-3
               issabel-asterisk-sounds-1.2.3-2
               issabel-callcenter-4.0.0-4
               issabel-email_admin-4.0.0-2
               issabel-endpointconfig2-4.0.0-3
               issabel-extras-4.0.0-4
               issabel-fax-4.0.0-1
               issabel-firstboot-4.0.0-3
               issabel-framework-4.0.0-6
               issabel-my_extension-4.0.0-1
               issabel-pbx-4.0.0-5
               issabel-portknock-4.0.0-2
               issabel-reports-4.0.0-3
               issabel-security-4.0.0-6
               issabel-system-4.0.0-7

             RoundCubeMail
               RoundCubeMail-0.3.1-13

             Mail
               postfix-2.10.1-6.el7
               cyrus-imapd-2.4.17-13.el7

             IM
               openfire- (not installed) -

             IssablPBX
               issabelPBX-2.11.0-47

             Asterisk
               asterisk11-11.25.3-3.el7.centos
               asterisk11-addons-11.25.3-3.el7.centos
               asterisk11-devel-11.25.3-3.el7.centos
               asterisk-es-sounds-1.0.0-0.el7.centos
               asterisk-fr-sounds-1.0.0-0.el7.centos
               asterisk-perl-1.03-1.el7.centos

             FAX
               hylafax-4.3.11-1rh7
               iaxmodem-1.3.0-2.el7.centos

             DRIVERS
               dahdi-2.11.1-1.el7.centos
               rhino-0.99.7-0
               wanpipe-util-7.0.25.1-0

            ggrraay Hello thank you, I'm very new to Linux, but I'm learning. I like it. wait for me. trying to do what you asked me

              ggrraay the PuTTY console is great. I just installed it.
              here what is requested


              [root@issabel ~]# lsusb
              Bus 001 Device 003: ID 0bda:8179 Realtek Semiconductor Corp. RTL8188EUS 802.11n Wireless Network Adapter
              Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
              Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
              [root@issabel ~]# ls /dev/ttyUSB
              ls: no se puede acceder a /dev/ttyUSB
              : No existe el fichero o el directorio
              [root@issabel ~]#

                emendoza For some reason there is no e1752 modem in usb devices list. Maybe you should try different usb port. Or maybe your issabel is in virtual machine? And second command should be
                ls /dev/ttyUSB*

                  ggrraay I have cast the second command as you asked. ls / dev / ttyUSB *
                  the asterisk is not seen here when I put the result of the console. I do not know the reason.

                  Yes, I'm in a Virtualbox virtual machine. Any suggestions?

                    emendoza I tried chan_dongle in VirtualBox, sometimes it works, sometimes it doesn't work for 5 or 10 minutes, then it's again fine. Then I installed issabel on a real hardware and all issues just vanished. But VirtualBox is fine for tests perhaps.
                    To make modem appear you have to "passthrough" modem device in VirtualBox. It's usb icon at the bottom. You need device filter like this https://imgur.com/a/ZlPcNZX. Then modem should appear in lsusb

                    Thank you ggrraay . After a tough battle, I managed to get virtualbox to show the Huawei e1752 device. Solution: remove all device drivers, mobile partner and datacard. then install the default drivers of the e1752 CD that run when you connect the device to the USB port and then EUREKA! my device is shown in the virtualbox as usb. I will continue showing results of the commands:
                    lsusb

                    ls / dev / ttyUSB *

                    [root @ issabel ~] # lsusb
                    Bus 001 Device 002: ID 12d1: 1406 Huawei Technologies Co., Ltd. E1750
                    Bus 001 Device 001: ID 1d6b: 0002 Linux Foundation 2.0 root hub
                    Bus 002 Device 001: ID 1d6b: 0001 Linux Foundation 1.1 root hub

                    [root @ issabel ~] # ls / dev / ttyUSB *

                    / dev / ttyUSB0 / dev / ttyUSB1

                    I will continue trying the instructions of darkside

                      ggrraay here:


                      [root@issabel ~]# lsusb
                      Bus 001 Device 002: ID 12d1:1406 Huawei Technologies Co., Ltd. E1750
                      Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
                      Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
                      [root@issabel ~]# ls /dev/ttyUSB*
                      /dev/ttyUSB0 /dev/ttyUSB1
                      -------------------------- now

                      Command: dongle show devices

                      ID Group State RSSI Mode Submode Provider Name Model Firmware IMEI IMSI Number
                      dongle0 0 Not connec 0 0 0 NONE Unknown

                        emendoza There should be 3 items, ttyUSB2 is absent. Have you put sim card in the modem? Also, it can be a wrong modem mode. It has different modes, like driver installation, when it opens in Windows flash drive with drivers, modem only, etc. You need modem only mode. Linux can switch mode for you, you need to execute this in console
                        yum install usb_modeswitch usb_modeswitch-data
                        and then reboot
                        For me lsusb shows
                        Bus 001 Device 007: ID 12d1:1001 Huawei Technologies Co., Ltd. E161/E169/E620/E800 HSDPA Modem
                        It should be "modem", but I'm not absolutely sure about this. Thats huawei E173.

                          ggrraay
                          EUREKA, MI Issabel is dongled !!!!!!
                          I just needed to enter edit the file in /etc/asterisk/dongle.conf, and change the ime of your dongle and the imsi

                          here info ::::::::::::::::::::::

                          Command: dongle show devices
                           
                           
                          ID Group State RSSI Mode Submode Provider Name Model Firmware IMEI IMSI Number
                          dongle0 0 Free 13 5 4 DIGITEL @ E1752 11.126.08.01.00 xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx + 58412xxxxxxx

                          ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

                          Command:
                          dongle show device state dongle0
                           
                           
                          -------------- Status -------------
                            Device: dongle0
                            State: Free
                            Audio: / dev / ttyUSB1
                            Data: / dev / ttyUSB2
                            Voice: Yes
                            SMS: Yes
                            Manufacturer: huawei
                            Model: E1752
                            Firmware: 11.126.08.01.00
                            IMEI: xxxxxxxxxxxxxxx
                            IMSI: xxxxxxxxxxxxxxx
                            GSM Registration Status: Registered, home network
                            RSSI: 12, -89 dBm
                            Mode: WCDMA
                            Submode: WCDMA
                            Provider Name: DIGITEL @
                            Location area code: E298
                            Cell ID: 15C7EA
                            Subscriber Number: +58412XXXXXXX
                            SMS Service Center: +584128000000
                            Use UCS-2 encoding: Yes
                            USSD use 7 bit encoding: No
                            USSD use UCS-2 decoding: Yes
                            Tasks in queue: 0
                            Commands in queue: 0
                            Call Waiting: Disabled
                            Current device state: start
                            Desired device state: start
                            When change state: now
                            Calls / Channels: 0
                              Active: 0
                              Held: 0
                              Dialing: 0
                              Alerting: 0
                              Incoming: 0
                              Waiting: 0
                              Releasing: 0
                              Initializing: 0

                          ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

                          Now do the trunk and call (I DO NOT KNOW HOW TO DO IT). I will continue in development

                            emendoza Congratulations :). You need to create custom trunk and put there in "Custom Dial String" Dongle/dongle0/$OUTNUM$