Issabel ISO (Latest): Download Here
Cloud Services: User Portal - Quick Guide
News: Telegram channel
Become a Patron!

the version package is chan_dongle-asterisk-11.25.0-rev34.x86_64 (asterisk11) your server is asterisk13.
not working different versions.
Os is centos 7, package install os.

    dariohimo

    There is a more current version for chan_dongle-asterisk-11.25.0-rev34.x86_64 (asterisk11).

    to work with my server?

      jlebr you have to compile chan_dongle for your asterisk (just google howto) or reinstall your issabel and choose asterisk11 during installation.

        12 days later

        hello darkside , I'm very new to all of pbx issabel, I'm trying to connect my huawei e1752 to receive and make calls. I followed your instructions but I could not connect the device. my huawei e1752, can make and receive calls from Mobile Partner, I've already done it. but I want to make a telephone exchange with Issabel to call and receive. I'd appreciate your help

        issabelPBX * CLI> dongle show device state dongle0
        -------------- Status -------------
          Device: dongle0
          State: Not connected Start scheduled
          Audio: / dev / ttyUSB1
          Data: / dev / ttyUSB2
          Voice: No
          SMS: No
          Manufacturer:
          Model:
          Firmware:
          IMEI:
          IMSI:
          GSM Registration Status: Unknown
          RSSI: 0, <= -113 dBm
          Mode: No Service
          Submode: No service
          Provider Name: NONE
          Location area code:
          Cell ID:
          Subscriber Number: Unknown
          SMS Service Center:
          Use UCS-2 encoding: No
          USSD use 7 bit encoding: No
          USSD use UCS-2 decoding: Yes
          Tasks in queue: 0
          Commands in queue: 0
          Call Waiting: Disabled
          Current device state: stop
          Desired device state: start
          When change state: now
          Calls / Channels: 0
            Active: 0
            Held: 0
            Dialing: 0
            Alerting: 0
            Incoming: 0
            Waiting: 0
            Releasing: 0
            Initializing: 0

        VERSION ISSABEL

        Kernel
           Linux (x86_64) -3.10.0-862.6.3.el7.x86_64

         Issabel
           issabel-4.0.0-1
           issabel-addons-4.0.0-4
           issabel-agenda-4.0.0-3
           issabel-asterisk-sounds-1.2.3-2
           issabel-callcenter-4.0.0-4
           issabel-email_admin-4.0.0-2
           issabel-endpointconfig2-4.0.0-3
           issabel-extras-4.0.0-4
           issabel-fax-4.0.0-1
           issabel-firstboot-4.0.0-3
           issabel-framework-4.0.0-6
           issabel-my_extension-4.0.0-1
           issabel-pbx-4.0.0-5
           issabel-portknock-4.0.0-2
           issabel-reports-4.0.0-3
           issabel-security-4.0.0-6
           issabel-system-4.0.0-7

         RoundCubeMail
           RoundCubeMail-0.3.1-13

         Mail
           postfix-2.10.1-6.el7
           cyrus-imapd-2.4.17-13.el7

         IM
           openfire- (not installed) -

         IssablPBX
           issabelPBX-2.11.0-47

         Asterisk
           asterisk11-11.25.3-3.el7.centos
           asterisk11-addons-11.25.3-3.el7.centos
           asterisk11-devel-11.25.3-3.el7.centos
           asterisk-es-sounds-1.0.0-0.el7.centos
           asterisk-fr-sounds-1.0.0-0.el7.centos
           asterisk-perl-1.03-1.el7.centos

         FAX
           hylafax-4.3.11-1rh7
           iaxmodem-1.3.0-2.el7.centos

         DRIVERS
           dahdi-2.11.1-1.el7.centos
           rhino-0.99.7-0
           wanpipe-util-7.0.25.1-0

        ggrraay Hello thank you, I'm very new to Linux, but I'm learning. I like it. wait for me. trying to do what you asked me

          ggrraay the PuTTY console is great. I just installed it.
          here what is requested


          [root@issabel ~]# lsusb
          Bus 001 Device 003: ID 0bda:8179 Realtek Semiconductor Corp. RTL8188EUS 802.11n Wireless Network Adapter
          Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
          Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
          [root@issabel ~]# ls /dev/ttyUSB
          ls: no se puede acceder a /dev/ttyUSB
          : No existe el fichero o el directorio
          [root@issabel ~]#

            emendoza For some reason there is no e1752 modem in usb devices list. Maybe you should try different usb port. Or maybe your issabel is in virtual machine? And second command should be
            ls /dev/ttyUSB*

              ggrraay I have cast the second command as you asked. ls / dev / ttyUSB *
              the asterisk is not seen here when I put the result of the console. I do not know the reason.

              Yes, I'm in a Virtualbox virtual machine. Any suggestions?

                emendoza I tried chan_dongle in VirtualBox, sometimes it works, sometimes it doesn't work for 5 or 10 minutes, then it's again fine. Then I installed issabel on a real hardware and all issues just vanished. But VirtualBox is fine for tests perhaps.
                To make modem appear you have to "passthrough" modem device in VirtualBox. It's usb icon at the bottom. You need device filter like this https://imgur.com/a/ZlPcNZX. Then modem should appear in lsusb

                Thank you ggrraay . After a tough battle, I managed to get virtualbox to show the Huawei e1752 device. Solution: remove all device drivers, mobile partner and datacard. then install the default drivers of the e1752 CD that run when you connect the device to the USB port and then EUREKA! my device is shown in the virtualbox as usb. I will continue showing results of the commands:
                lsusb

                ls / dev / ttyUSB *

                [root @ issabel ~] # lsusb
                Bus 001 Device 002: ID 12d1: 1406 Huawei Technologies Co., Ltd. E1750
                Bus 001 Device 001: ID 1d6b: 0002 Linux Foundation 2.0 root hub
                Bus 002 Device 001: ID 1d6b: 0001 Linux Foundation 1.1 root hub

                [root @ issabel ~] # ls / dev / ttyUSB *

                / dev / ttyUSB0 / dev / ttyUSB1

                I will continue trying the instructions of darkside

                  ggrraay here:


                  [root@issabel ~]# lsusb
                  Bus 001 Device 002: ID 12d1:1406 Huawei Technologies Co., Ltd. E1750
                  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
                  Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
                  [root@issabel ~]# ls /dev/ttyUSB*
                  /dev/ttyUSB0 /dev/ttyUSB1
                  -------------------------- now

                  Command: dongle show devices

                  ID Group State RSSI Mode Submode Provider Name Model Firmware IMEI IMSI Number
                  dongle0 0 Not connec 0 0 0 NONE Unknown

                    emendoza There should be 3 items, ttyUSB2 is absent. Have you put sim card in the modem? Also, it can be a wrong modem mode. It has different modes, like driver installation, when it opens in Windows flash drive with drivers, modem only, etc. You need modem only mode. Linux can switch mode for you, you need to execute this in console
                    yum install usb_modeswitch usb_modeswitch-data
                    and then reboot
                    For me lsusb shows
                    Bus 001 Device 007: ID 12d1:1001 Huawei Technologies Co., Ltd. E161/E169/E620/E800 HSDPA Modem
                    It should be "modem", but I'm not absolutely sure about this. Thats huawei E173.

                      ggrraay
                      EUREKA, MI Issabel is dongled !!!!!!
                      I just needed to enter edit the file in /etc/asterisk/dongle.conf, and change the ime of your dongle and the imsi

                      here info ::::::::::::::::::::::

                      Command: dongle show devices
                       
                       
                      ID Group State RSSI Mode Submode Provider Name Model Firmware IMEI IMSI Number
                      dongle0 0 Free 13 5 4 DIGITEL @ E1752 11.126.08.01.00 xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx + 58412xxxxxxx

                      ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

                      Command:
                      dongle show device state dongle0
                       
                       
                      -------------- Status -------------
                        Device: dongle0
                        State: Free
                        Audio: / dev / ttyUSB1
                        Data: / dev / ttyUSB2
                        Voice: Yes
                        SMS: Yes
                        Manufacturer: huawei
                        Model: E1752
                        Firmware: 11.126.08.01.00
                        IMEI: xxxxxxxxxxxxxxx
                        IMSI: xxxxxxxxxxxxxxx
                        GSM Registration Status: Registered, home network
                        RSSI: 12, -89 dBm
                        Mode: WCDMA
                        Submode: WCDMA
                        Provider Name: DIGITEL @
                        Location area code: E298
                        Cell ID: 15C7EA
                        Subscriber Number: +58412XXXXXXX
                        SMS Service Center: +584128000000
                        Use UCS-2 encoding: Yes
                        USSD use 7 bit encoding: No
                        USSD use UCS-2 decoding: Yes
                        Tasks in queue: 0
                        Commands in queue: 0
                        Call Waiting: Disabled
                        Current device state: start
                        Desired device state: start
                        When change state: now
                        Calls / Channels: 0
                          Active: 0
                          Held: 0
                          Dialing: 0
                          Alerting: 0
                          Incoming: 0
                          Waiting: 0
                          Releasing: 0
                          Initializing: 0

                      ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

                      Now do the trunk and call (I DO NOT KNOW HOW TO DO IT). I will continue in development

                        emendoza Congratulations :). You need to create custom trunk and put there in "Custom Dial String" Dongle/dongle0/$OUTNUM$

                          Ok ggrraay . I followed Darkside step like this:

                          Setup a new custom trunk for your dongle under Connectivity → Trunks → Add Custom Trunk and set these values:

                          Trunk Name: to-my-cellphone
                          Outbound CallerID: Your SIM card number with country code (with a plus sign at the beginning)
                          Custom Dial String: dongle / dongle0 / $ OUTNUM $

                          ::::::::::::::::::::
                          Now, how do I make a call from the dongle and Issabel? Do you have a knowledge of this? TK

                            emendoza You can add extension in issabel, and use softphone for making calls. For example Zoiper for android or X-Lite for Windows. You have to input your VM ip, extension number and password in softphone settings.

                            Hello Everyone,

                            Is there any solution like Script ose Web GUI, for receiving and senning the SMS?

                            Thanks in advance