Issabel ISO (Latest): Download Here
Cloud Services: User Portal - Quick Guide
News: Telegram channel
Become a Patron!

Hello

Everyone tried chan_dongle with issabel?

I tried to compile but i can't, give me error on make.

Thanks

ML

    Most helpful to know what the error was and which branch you tried to install

      Hello, thanks for your help, i have the chan_dongle working now, i found a brasilian site: http://www.kingtelecom.com.br, they have a tutorial and a rpm package, with a few commands and editing a dongle.conf file, it's working now.

      Thanks.

      enamchuk i trie afternoon to made a English tutorial, and share the rpm package. But now i can't i only have mobile phone and do not have material to translate.

        enamchuk That's rock

        1. First of all find what version of asterisk you are running, on console type: rasterisk -x "core show version"

        If your version is lower than version 11.21-0 update the asterisk with the command: yum update
        asterisk -y

        1. install the driver for dongle , the link that i provide is for 64bits and for version of asterisk 11.25-0rev34:

        rpm -ivh http://download.kingtelecom.com.br/download/chan_dongle-asterisk-11.25-0-rev34.x86_64.rpm

        that command, makes the download from the source and install it.

        1. Enter inside of the CLI of the asterisk, with the command: rasterisk

        set verbose mode with command: core set verbose 3

        Execute the command: module unload chan_dongle.so
        and then: module load chan_dongle.so

        1. Run: yum install usb_modeswitch -y

        If you see the following error message in your Asterisk perform the following steps.
        Chan_dongle.c: unable to open / dev / ttyUSB1: Permission denied

        Run: vim /etc/udev/rules.d/92-dongle.rules and add the content below.

        KERNEL == "ttyUSB *", MODE = "0666", OWNER = "asterisk", GROUP = "uucp"

        Save the file.

        Restart the server

        When plugging in the first time modem make sure it's recognized in / dev, most modems
        Recognize 3 ttyUSB, to verify that your modem recognized correctly execute.
        Run: ls -la / dev / ttyUSB *

        Enter now into the asterisk CLI and run the command: module reload chan_dongle.so
        To check if the modens have been recognized type: dongle show devices
        you see information about yor firmware, imei, operator, imsi, etc

        for now you need to edite the file in /etc/asterisk/dongle.conf, and change the imei of your dongle and the imsi

        Setup a new custom trunk for your dongle under Connectivity → Trunks → Add Custom Trunk and set these values:

        Trunk Name: to-my-cellphone
        Outbound CallerID: Your SIM card number with country code (with a plus sign at the beginning)
        Custom Dial String: dongle/dongle0/$OUTNUM$

        set a outbound route withe a name, a dial patern and Trunk Sequence for Matched Routes

        I hope this help you.

        Mlopes

        8 months later

        Good morning, I installed chan-dongle in issabel 4, following the steps above, preo when I enter the console asterisk and charge the module returns this error, someone can help me.
        I have tried several things, I have searched for the imsi, I can not find it, I have also checked that this USB modem is unlocked, I have checked that it has coverage, and that's fine, as the error said:
        ERROR [3573]: at_response.c: 364 at_response_error: [dongle0] Getting IMSI number failed

        Thanks for the help you can give me

          Good afternoon, I answer myself, the problem had it in the SIM, I activated it and I have modified the modem firmware to a more modern version, now I get calls but I have a big problem, nothing is heard, apparently there is some problem with the codec negotiation, I get this error:

          WARNING[4794][C-00000009]: channel.c:1002 channel_indicate: [Dongle/dongle0-0100000008] Don't know how to indicate condition 22
          [2018-04-23 14:14:43] WARNING[4794][C-00000009]: channel.c:1002 channel_indicate: [Dongle/dongle0-0100000008] Don't know how to indicate condition 22
          [2018-04-23 14:14:43] WARNING[4794][C-00000009]: channel.c:1002 channel_indicate: [Dongle/dongle0-0100000008] Don't know how to indicate condition 33
          [2018-04-23 14:14:44] WARNING[4794][C-00000009]: channel.c:1002 channel_indicate: [Dongle/dongle0-0100000008] Don't know how to indicate condition 33

          i think that it is for voice codecs, someone with same issue?

            Good morning, attached asterisk capture of a call made from issabel by a dongle, the call is made but I do not have audio in any way.

            -- Called dongle/dongle0/655463605
            -- Dongle/dongle0-0100000003 is making progress passing it to SIP/1101-00000001
            [2018-04-26 11:53:11] ERROR[4423]: at_response.c:472 at_response_error: [dongle0] ATDDSETEX failed
            > 0x7fb224033d70 -- Strict RTP switching to RTP remote address 172.16.0.211:4000 as source
            > 0x7fb224033d70 -- Strict RTP learning complete - Locking on source address 172.16.0.211:4000
            == Everyone is busy/congested at this time (1:1/0/0)
            -- Executing [s@macro-dialout-trunk:31] NoOp("SIP/1101-00000001", "Dial failed for some reason with DIALSTATUS = BUSY and HANGUPCAUSE = 17") in new stack
            -- Executing [s@macro-dialout-trunk:32] GotoIf("SIP/1101-00000001", "0?continue,1:s-BUSY,1") in new stack
            -- Goto (macro-dialout-trunk,s-BUSY,1)
            -- Executing [s-BUSY@macro-dialout-trunk:1] NoOp("SIP/1101-00000001", "Dial failed due to trunk reporting BUSY - giving up") in new stack
            -- Executing [s-BUSY@macro-dialout-trunk:2] PlayTones("SIP/1101-00000001", "busy") in new stack
            -- Executing [s-BUSY@macro-dialout-trunk:3] Busy("SIP/1101-00000001", "20") in new stack
            == Spawn extension (macro-dialout-trunk, s-BUSY, 3) exited non-zero on 'SIP/1101-00000001' in macro 'dialout-trunk'
            == Spawn extension (from-internal, 655463605, 5) exited non-zero on 'SIP/1101-00000001'
            -- Executing [h@from-internal:1] Hangup("SIP/1101-00000001", "") in new stack
            == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/1101-00000001'
            -- Executing [1101@default:1] Set("Dongle/dongle0-0100000004", "RINGTIMER=15") in new stack
            -- Executing [1101@default:2] Macro("Dongle/dongle0-0100000004", "exten-vm,novm,1101,0,0,0") in new stack
            -- Executing [s@macro-exten-vm:1] Macro("Dongle/dongle0-0100000004", "user-callerid,") in new stack
            -- Executing [s@macro-user-callerid:1] Set("Dongle/dongle0-0100000004", "TOUCH_MONITOR=1524736430.10") in new stack
            -- Executing [s@macro-user-callerid:2] Set("Dongle/dongle0-0100000004", "AMPUSER=961152743") in new stack
            -- Executing [s@macro-user-callerid:3] GotoIf("Dongle/dongle0-0100000004", "0?report") in new stack
            -- Executing [s@macro-user-callerid:4] ExecIf("Dongle/dongle0-0100000004", "1?Set(REALCALLERIDNUM=961152743)") in new stack
            -- Executing [s@macro-user-callerid:5] Set("Dongle/dongle0-0100000004", "AMPUSER=") in new stack
            -- Executing [s@macro-user-callerid:6] GotoIf("Dongle/dongle0-0100000004", "0?limit") in new stack
            -- Executing [s@macro-user-callerid:7] Set("Dongle/dongle0-0100000004", "AMPUSERCIDNAME=") in new stack
            -- Executing [s@macro-user-callerid:8] GotoIf("Dongle/dongle0-0100000004", "1?report") in new stack
            -- Goto (macro-user-callerid,s,15)
            -- Executing [s@macro-user-callerid:15] GotoIf("Dongle/dongle0-0100000004", "0?continue") in new stack
            -- Executing [s@macro-user-callerid:16] Set("Dongle/dongle0-0100000004", "
            TTL=64") in new stack
            -- Executing [s@macro-user-callerid:17] GotoIf("Dongle/dongle0-0100000004", "1?continue") in new stack
            -- Goto (macro-user-callerid,s,28)
            -- Executing [s@macro-user-callerid:28] Set("Dongle/dongle0-0100000004", "CALLERID(number)=961152743") in new stack
            -- Executing [s@macro-user-callerid:29] Set("Dongle/dongle0-0100000004", "CALLERID(name)=dongle0") in new stack
            -- Executing [s@macro-user-callerid:30] Set("Dongle/dongle0-0100000004", "CDR(cnum)=961152743") in new stack
            -- Executing [s@macro-user-callerid:31] Set("Dongle/dongle0-0100000004", "CDR(cnam)=dongle0") in new stack
            -- Executing [s@macro-user-callerid:32] Set("Dongle/dongle0-0100000004", "CHANNEL(language)=en") in new stack
            -- Executing [s@macro-exten-vm:2] Set("Dongle/dongle0-0100000004", "RingGroupMethod=none") in new stack
            -- Executing [s@macro-exten-vm:3] Set("Dongle/dongle0-0100000004", "EXTTOCALL=1101") in new stack
            -- Executing [s@macro-exten-vm:4] Set("Dongle/dongle0-0100000004", "
            PICKUPMARK=1101") in new stack
            -- Executing [s@macro-exten-vm:5] Set("Dongle/dongle0-0100000004", "RT=") in new stack
            -- Executing [s@macro-exten-vm:6] Gosub("Dongle/dongle0-0100000004", "sub-record-check,s,1(exten,1101,)") in new stack
            -- Executing [s@sub-record-check:1] Set("Dongle/dongle0-0100000004", "REC_POLICY_MODE_SAVE=") in new stack
            -- Executing [s@sub-record-check:2] GotoIf("Dongle/dongle0-0100000004", "1?check") in new stack
            -- Goto (sub-record-check,s,7)
            -- Executing [s@sub-record-check:7] Set("Dongle/dongle0-0100000004", "MON_FMT=WAV") in new stack
            -- Executing [s@sub-record-check:8] GotoIf("Dongle/dongle0-0100000004", "1?next") in new stack
            -- Goto (sub-record-check,s,11)
            -- Executing [s@sub-record-check:11] ExecIf("Dongle/dongle0-0100000004", "0?Return()") in new stack
            -- Executing [s@sub-record-check:12] ExecIf("Dongle/dongle0-0100000004", "0?Set(
            REC_POLICY_MODE=)") in new stack
            -- Executing [s@sub-record-check:13] GotoIf("Dongle/dongle0-0100000004", "0?exten,1") in new stack
            -- Executing [s@sub-record-check:14] Set("Dongle/dongle0-0100000004", "REC_STATUS=INITIALIZED") in new stack
            -- Executing [s@sub-record-check:15] Set("Dongle/dongle0-0100000004", "NOW=1524736430") in new stack
            -- Executing [s@sub-record-check:16] Set("Dongle/dongle0-0100000004", "
            DAY=26") in new stack
            -- Executing [s@sub-record-check:17] Set("Dongle/dongle0-0100000004", "MONTH=04") in new stack
            -- Executing [s@sub-record-check:18] Set("Dongle/dongle0-0100000004", "
            YEAR=2018") in new stack
            -- Executing [s@sub-record-check:19] Set("Dongle/dongle0-0100000004", "TIMESTR=20180426-115350") in new stack
            -- Executing [s@sub-record-check:20] Set("Dongle/dongle0-0100000004", "
            FROMEXTEN=961152743") in new stack
            -- Executing [s@sub-record-check:21] Set("Dongle/dongle0-0100000004", "CALLFILENAME=exten-1101-961152743-20180426-115350-1524736430.10") in new stack
            -- Executing [s@sub-record-check:22] Goto("Dongle/dongle0-0100000004", "exten,1") in new stack
            -- Goto (sub-record-check,exten,1)
            -- Executing [exten@sub-record-check:1] GotoIf("Dongle/dongle0-0100000004", "0?callee") in new stack
            -- Executing [exten@sub-record-check:2] Set("Dongle/dongle0-0100000004", "
            REC_POLICY_MODE=dontcare") in new stack
            -- Executing [exten@sub-record-check:3] GotoIf("Dongle/dongle0-0100000004", "1?caller") in new stack
            -- Goto (sub-record-check,exten,10)
            -- Executing [exten@sub-record-check:10] Set("Dongle/dongle0-0100000004", "REC_POLICY_MODE=") in new stack
            -- Executing [exten@sub-record-check:11] GosubIf("Dongle/dongle0-0100000004", "0?record,1(exten,1101,961152743)") in new stack
            -- Executing [exten@sub-record-check:12] Return("Dongle/dongle0-0100000004", "") in new stack
            -- Executing [s@macro-exten-vm:7] Macro("Dongle/dongle0-0100000004", "dial-one,,Ttr,1101") in new stack
            -- Executing [s@macro-dial-one:1] Set("Dongle/dongle0-0100000004", "DEXTEN=1101") in new stack
            -- Executing [s@macro-dial-one:2] Set("Dongle/dongle0-0100000004", "DIALSTATUS_CW=") in new stack
            -- Executing [s@macro-dial-one:3] GosubIf("Dongle/dongle0-0100000004", "0?screen,1()") in new stack
            -- Executing [s@macro-dial-one:4] GosubIf("Dongle/dongle0-0100000004", "0?cf,1()") in new stack
            -- Executing [s@macro-dial-one:5] GotoIf("Dongle/dongle0-0100000004", "1?skip1") in new stack
            -- Goto (macro-dial-one,s,8)
            -- Executing [s@macro-dial-one:8] GotoIf("Dongle/dongle0-0100000004", "0?nodial") in new stack
            -- Executing [s@macro-dial-one:9] GotoIf("Dongle/dongle0-0100000004", "0?continue") in new stack
            -- Executing [s@macro-dial-one:10] Set("Dongle/dongle0-0100000004", "EXTHASCW=ENABLED") in new stack
            -- Executing [s@macro-dial-one:11] GotoIf("Dongle/dongle0-0100000004", "0?next1:cwinusebusy") in new stack
            -- Goto (macro-dial-one,s,23)
            -- Executing [s@macro-dial-one:23] GotoIf("Dongle/dongle0-0100000004", "1?next3:continue") in new stack
            -- Goto (macro-dial-one,s,24)
            -- Executing [s@macro-dial-one:24] ExecIf("Dongle/dongle0-0100000004", "0?Set(DIALSTATUS_CW=BUSY)") in new stack
            -- Executing [s@macro-dial-one:25] GotoIf("Dongle/dongle0-0100000004", "0?nodial") in new stack
            -- Executing [s@macro-dial-one:26] GosubIf("Dongle/dongle0-0100000004", "1?dstring,1():dlocal,1()") in new stack
            -- Executing [dstring@macro-dial-one:1] Set("Dongle/dongle0-0100000004", "DSTRING=") in new stack
            -- Executing [dstring@macro-dial-one:2] Set("Dongle/dongle0-0100000004", "DEVICES=1101") in new stack
            -- Executing [dstring@macro-dial-one:3] ExecIf("Dongle/dongle0-0100000004", "0?Return()") in new stack
            -- Executing [dstring@macro-dial-one:4] ExecIf("Dongle/dongle0-0100000004", "0?Set(DEVICES=101)") in new stack
            -- Executing [dstring@macro-dial-one:5] Set("Dongle/dongle0-0100000004", "LOOPCNT=1") in new stack
            -- Executing [dstring@macro-dial-one:6] Set("Dongle/dongle0-0100000004", "ITER=1") in new stack
            -- Executing [dstring@macro-dial-one:7] Set("Dongle/dongle0-0100000004", "THISDIAL=SIP/1101") in new stack
            -- Executing [dstring@macro-dial-one:8] GosubIf("Dongle/dongle0-0100000004", "1?zap2dahdi,1()") in new stack
            -- Executing [zap2dahdi@macro-dial-one:1] ExecIf("Dongle/dongle0-0100000004", "0?Return()") in new stack
            -- Executing [zap2dahdi@macro-dial-one:2] Set("Dongle/dongle0-0100000004", "NEWDIAL=") in new stack
            -- Executing [zap2dahdi@macro-dial-one:3] Set("Dongle/dongle0-0100000004", "LOOPCNT2=1") in new stack
            -- Executing [zap2dahdi@macro-dial-one:4] Set("Dongle/dongle0-0100000004", "ITER2=1") in new stack
            -- Executing [zap2dahdi@macro-dial-one:5] Set("Dongle/dongle0-0100000004", "THISPART2=SIP/1101") in new stack
            -- Executing [zap2dahdi@macro-dial-one:6] ExecIf("Dongle/dongle0-0100000004", "0?Set(THISPART2=DAHDI/1101)") in new stack
            -- Executing [zap2dahdi@macro-dial-one:7] Set("Dongle/dongle0-0100000004", "NEWDIAL=SIP/1101&") in new stack
            -- Executing [zap2dahdi@macro-dial-one:8] Set("Dongle/dongle0-0100000004", "ITER2=2") in new stack
            -- Executing [zap2dahdi@macro-dial-one:9] GotoIf("Dongle/dongle0-0100000004", "0?begin2") in new stack
            -- Executing [zap2dahdi@macro-dial-one:10] Set("Dongle/dongle0-0100000004", "THISDIAL=SIP/1101") in new stack
            -- Executing [zap2dahdi@macro-dial-one:11] Return("Dongle/dongle0-0100000004", "") in new stack
            -- Executing [dstring@macro-dial-one:9] Set("Dongle/dongle0-0100000004", "DSTRING=SIP/1101&") in new stack
            -- Executing [dstring@macro-dial-one:10] Set("Dongle/dongle0-0100000004", "ITER=2") in new stack
            -- Executing [dstring@macro-dial-one:11] GotoIf("Dongle/dongle0-0100000004", "0?begin") in new stack
            -- Executing [dstring@macro-dial-one:12] Set("Dongle/dongle0-0100000004", "DSTRING=SIP/1101") in new stack
            -- Executing [dstring@macro-dial-one:13] Return("Dongle/dongle0-0100000004", "") in new stack
            -- Executing [s@macro-dial-one:27] GotoIf("Dongle/dongle0-0100000004", "0?nodial") in new stack
            -- Executing [s@macro-dial-one:28] GotoIf("Dongle/dongle0-0100000004", "0?skiptrace") in new stack
            -- Executing [s@macro-dial-one:29] GosubIf("Dongle/dongle0-0100000004", "1?ctset,1():ctclear,1()") in new stack
            -- Executing [ctset@macro-dial-one:1] Set("Dongle/dongle0-0100000004", "DB(CALLTRACE/1101)=961152743") in new stack
            -- Executing [ctset@macro-dial-one:2] Return("Dongle/dongle0-0100000004", "") in new stack
            -- Executing [s@macro-dial-one:30] Set("Dongle/dongle0-0100000004", "D_OPTIONS=Ttr") in new stack
            -- Executing [s@macro-dial-one:31] ExecIf("Dongle/dongle0-0100000004", "0?SIPAddHeader(Alert-Info: )") in new stack
            -- Executing [s@macro-dial-one:32] ExecIf("Dongle/dongle0-0100000004", "0?SIPAddHeader()") in new stack
            -- Executing [s@macro-dial-one:33] ExecIf("Dongle/dongle0-0100000004", "0?Set(CHANNEL(musicclass)=)") in new stack
            -- Executing [s@macro-dial-one:34] GosubIf("Dongle/dongle0-0100000004", "0?qwait,1()") in new stack
            -- Executing [s@macro-dial-one:35] Set("Dongle/dongle0-0100000004", "
            CWIGNORE=") in new stack
            -- Executing [s@macro-dial-one:36] Set("Dongle/dongle0-0100000004", "__KEEPCID=TRUE") in new stack
            -- Executing [s@macro-dial-one:37] GotoIf("Dongle/dongle0-0100000004", "0?usegoto,1") in new stack
            -- Executing [s@macro-dial-one:38] GotoIf("Dongle/dongle0-0100000004", "1?godial") in new stack
            -- Goto (macro-dial-one,s,43)
            -- Executing [s@macro-dial-one:43] Dial("Dongle/dongle0-0100000004", "SIP/1101,,Ttr") in new stack
            == Using SIP RTP TOS bits 184
            == Using SIP RTP CoS mark 5
            -- Called SIP/1101
            [2018-04-26 11:53:50] WARNING[4440][C-00000006]: channel.c:1002 channel_indicate: [Dongle/dongle0-0100000004] Don't know how to indicate condition 22
            [2018-04-26 11:53:50] WARNING[4440][C-00000006]: channel.c:1002 channel_indicate: [Dongle/dongle0-0100000004] Don't know how to indicate condition 22
            [2018-04-26 11:53:50] WARNING[4440][C-00000006]: channel.c:1002 channel_indicate: [Dongle/dongle0-0100000004] Don't know how to indicate condition 33
            [2018-04-26 11:53:51] WARNING[4440][C-00000006]: channel.c:1002 channel_indicate: [Dongle/dongle0-0100000004] Don't know how to indicate condition 33
            -- SIP/1101-00000002 is ringing
            [2018-04-26 11:53:51] WARNING[4440][C-00000006]: channel.c:1002 channel_indicate: [Dongle/dongle0-0100000004] Don't know how to indicate condition 33
            -- SIP/1101-00000002 is ringing
            > 0x7fb21c032730 -- Strict RTP learning after remote address set to: 172.16.0.211:4002
            [2018-04-26 11:54:02] WARNING[4440][C-00000006]: channel.c:1002 channel_indicate: [Dongle/dongle0-0100000004] Don't know how to indicate condition 33
            [2018-04-26 11:54:02] WARNING[4440][C-00000006]: channel.c:1002 channel_indicate: [Dongle/dongle0-0100000004] Don't know how to indicate condition 22
            -- SIP/1101-00000002 answered Dongle/dongle0-0100000004
            > 0x7fb21c032730 -- Strict RTP switching to RTP remote address 172.16.0.211:4002 as source
            [2018-04-26 11:54:02] ERROR[4423]: at_response.c:472 at_response_error: [dongle0] ATDDSETEX failed
            > 0x7fb21c032730 -- Strict RTP learning complete - Locking on source address 172.16.0.211:4002
            -- Executing [h@macro-dial-one:1] Macro("Dongle/dongle0-0100000004", "hangupcall,") in new stack
            -- Executing [s@macro-hangupcall:1] GotoIf("Dongle/dongle0-0100000004", "1?endmixmoncheck") in new stack
            -- Goto (macro-hangupcall,s,20)
            -- Executing [s@macro-hangupcall:20] NoOp("Dongle/dongle0-0100000004", "End of MIXMON check") in new stack
            -- Executing [s@macro-hangupcall:21] GotoIf("Dongle/dongle0-0100000004", "1?nomeetmemon") in new stack
            -- Goto (macro-hangupcall,s,39)
            -- Executing [s@macro-hangupcall:39] NoOp("Dongle/dongle0-0100000004", "End of MEETME check") in new stack
            -- Executing [s@macro-hangupcall:40] GotoIf("Dongle/dongle0-0100000004", "1?noautomon") in new stack
            -- Goto (macro-hangupcall,s,45)
            -- Executing [s@macro-hangupcall:45] NoOp("Dongle/dongle0-0100000004", "TOUCH_MONITOR_OUTPUT=") in new stack
            -- Executing [s@macro-hangupcall:46] GotoIf("Dongle/dongle0-0100000004", "1?noautomon2") in new stack
            -- Goto (macro-hangupcall,s,52)
            -- Executing [s@macro-hangupcall:52] NoOp("Dongle/dongle0-0100000004", "MONITOR_FILENAME=") in new stack
            -- Executing [s@macro-hangupcall:53] GotoIf("Dongle/dongle0-0100000004", "1?noautomon3") in new stack
            -- Goto (macro-hangupcall,s,59)
            -- Executing [s@macro-hangupcall:59] NoOp("Dongle/dongle0-0100000004", "MIXMONITOR_FILENAME=") in new stack
            -- Executing [s@macro-hangupcall:60] GotoIf("Dongle/dongle0-0100000004", "1?noautomon4") in new stack
            -- Goto (macro-hangupcall,s,62)
            -- Executing [s@macro-hangupcall:62] NoOp("Dongle/dongle0-0100000004", "ONETOUCH_RECFILE=") in new stack
            -- Executing [s@macro-hangupcall:63] NoOp("Dongle/dongle0-0100000004", "CDR recordingfile set to: ") in new stack
            -- Executing [s@macro-hangupcall:64] GotoIf("Dongle/dongle0-0100000004", "1?skiprg") in new stack
            -- Goto (macro-hangupcall,s,67)
            -- Executing [s@macro-hangupcall:67] GotoIf("Dongle/dongle0-0100000004", "1?skipblkvm") in new stack
            -- Goto (macro-hangupcall,s,70)
            -- Executing [s@macro-hangupcall:70] GotoIf("Dongle/dongle0-0100000004", "1?theend") in new stack
            -- Goto (macro-hangupcall,s,72)
            -- Executing [s@macro-hangupcall:72] AGI("Dongle/dongle0-0100000004", "hangup.agi") in new stack
            -- Launched AGI Script /var/lib/asterisk/agi-bin/hangup.agi
            -- <Dongle/dongle0-0100000004>AGI Script hangup.agi completed, returning 0
            -- Executing [s@macro-hangupcall:73] Hangup("Dongle/dongle0-0100000004", "") in new stack
            == Spawn extension (macro-hangupcall, s, 73) exited non-zero on 'Dongle/dongle0-0100000004' in macro 'hangupcall'
            == Spawn extension (macro-dial-one, h, 1) exited non-zero on 'Dongle/dongle0-0100000004'
            == Spawn extension (macro-dial-one, s, 43) exited non-zero on 'Dongle/dongle0-0100000004' in macro 'dial-one'
            == Spawn extension (macro-exten-vm, s, 7) exited non-zero on 'Dongle/dongle0-0100000004' in macro 'exten-vm'
            == Spawn extension (default, 1101, 2) exited non-zero on 'Dongle/dongle0-0100000004'
            -- Remote UNIX connection
            -- Remote UNIX connection disconnected
            issabelPBX*CLI>

            and when I look at the characteristics of the dongle with dongle show device state dongle0 answers me this:

            issabelPBX*CLI> dongle show device state dongle0
            -------------- Status -------------
            Device : dongle0
            State : Free
            Audio : /dev/ttyUSB0
            Data : /dev/ttyUSB1
            Voice : Yes
            SMS : Yes
            Manufacturer : huawei
            Model : E156G
            Firmware : 11.608.08.81.00
            IMEI : 357133031008707
            IMSI : 214075525622487
            GSM Registration Status : Registered, home network
            RSSI : 16, -81 dBm
            Mode : No Service
            Submode : No service
            Provider Name : FFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
            Location area code : 1236
            Cell ID : 1163
            Subscriber Number : Unknown
            SMS Service Center : +34609090909
            Use UCS-2 encoding : Yes
            USSD use 7 bit encoding : No
            USSD use UCS-2 decoding : Yes
            Tasks in queue : 0
            Commands in queue : 0
            Call Waiting : Disabled
            Current device state : start
            Desired device state : start
            When change state : now
            Calls/Channels : 0
            Active : 0
            Held : 0
            Dialing : 0
            Alerting : 0
            Incoming : 0
            Waiting : 0
            Releasing : 0
            Initializing : 0

            issabelPBX*CLI>

            Thanks for the help you can give me

              15 days later

              My Issabel is dongled!!!!!!

              thanks.

                thanks, please write instalation by users new.

                  Good morning, I just followed the instructions of the post that explains it, what happens is that I had a problem with the audio in the calls and I solved it by downloading a firmware version for my modem from another model with the same chip so that the voice function. I have a Huawei e156G modem, and I put the E160Update_11.609.10.02.432.B418.exe firmware version of an e160 model that carries the same chip.

                  Thank you all for your help, let's keep growing ...

                  7 months later

                  darkside

                  hi. my issabel is: Asterisk 13.22.0 built by issabel @ issabeldev8 on a x86_64 running Linux on 2018-08-30 13:58:00 UTC

                  but when I execute the command: rpm -ivh http://download.kingtelecom.com.br/download/chan_dongle-asterisk-11.25-0-rev34.x86_64.rpm

                  Error: Dependency error:
                  asterisk-devel is required by chan_dongle-asterisk-11.25.0-rev34.x86_64

                  I run yum install asterisk-devel, the server is reinstalled, I return to give it to download the program and I get dependency error again.

                  could you help me?

                  asterisk 13 your issabelpbx, and install asterisk11 dongle?

                    dariohimo

                    hi my issabel is:
                    [root@issabel etc]# rasterisk -x "core show version"
                    Asterisk 13.22.0 built by issabel @ issabeldev8 on a x86_64 running Linux on 2018-08-30 13:58:00 UTC

                    and I want to install a huawei mobile broadband e173

                    [root@issabel etc]# lsusb
                    Bus 001 Device 007: ID 12d1:140c Huawei Technologies Co., Ltd. E180v
                    I want chan dongle to work
                    can you help?

                      chan_dongle-asterisk-11.25.0-rev34.x86_64

                        the version package is chan_dongle-asterisk-11.25.0-rev34.x86_64 (asterisk11) your server is asterisk13.
                        not working different versions.
                        Os is centos 7, package install os.

                          dariohimo

                          There is a more current version for chan_dongle-asterisk-11.25.0-rev34.x86_64 (asterisk11).

                          to work with my server?