Issabel ISO (Latest): Download Here
Cloud Services: User Portal - Quick Guide
News: Telegram channel
Become a Patron!

emendoza There should be 3 items, ttyUSB2 is absent. Have you put sim card in the modem? Also, it can be a wrong modem mode. It has different modes, like driver installation, when it opens in Windows flash drive with drivers, modem only, etc. You need modem only mode. Linux can switch mode for you, you need to execute this in console
yum install usb_modeswitch usb_modeswitch-data
and then reboot
For me lsusb shows
Bus 001 Device 007: ID 12d1:1001 Huawei Technologies Co., Ltd. E161/E169/E620/E800 HSDPA Modem
It should be "modem", but I'm not absolutely sure about this. Thats huawei E173.

    ggrraay
    EUREKA, MI Issabel is dongled !!!!!!
    I just needed to enter edit the file in /etc/asterisk/dongle.conf, and change the ime of your dongle and the imsi

    here info ::::::::::::::::::::::

    Command: dongle show devices
     
     
    ID Group State RSSI Mode Submode Provider Name Model Firmware IMEI IMSI Number
    dongle0 0 Free 13 5 4 DIGITEL @ E1752 11.126.08.01.00 xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx + 58412xxxxxxx

    ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

    Command:
    dongle show device state dongle0
     
     
    -------------- Status -------------
      Device: dongle0
      State: Free
      Audio: / dev / ttyUSB1
      Data: / dev / ttyUSB2
      Voice: Yes
      SMS: Yes
      Manufacturer: huawei
      Model: E1752
      Firmware: 11.126.08.01.00
      IMEI: xxxxxxxxxxxxxxx
      IMSI: xxxxxxxxxxxxxxx
      GSM Registration Status: Registered, home network
      RSSI: 12, -89 dBm
      Mode: WCDMA
      Submode: WCDMA
      Provider Name: DIGITEL @
      Location area code: E298
      Cell ID: 15C7EA
      Subscriber Number: +58412XXXXXXX
      SMS Service Center: +584128000000
      Use UCS-2 encoding: Yes
      USSD use 7 bit encoding: No
      USSD use UCS-2 decoding: Yes
      Tasks in queue: 0
      Commands in queue: 0
      Call Waiting: Disabled
      Current device state: start
      Desired device state: start
      When change state: now
      Calls / Channels: 0
        Active: 0
        Held: 0
        Dialing: 0
        Alerting: 0
        Incoming: 0
        Waiting: 0
        Releasing: 0
        Initializing: 0

    ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

    Now do the trunk and call (I DO NOT KNOW HOW TO DO IT). I will continue in development

      emendoza Congratulations :). You need to create custom trunk and put there in "Custom Dial String" Dongle/dongle0/$OUTNUM$

        Ok ggrraay . I followed Darkside step like this:

        Setup a new custom trunk for your dongle under Connectivity → Trunks → Add Custom Trunk and set these values:

        Trunk Name: to-my-cellphone
        Outbound CallerID: Your SIM card number with country code (with a plus sign at the beginning)
        Custom Dial String: dongle / dongle0 / $ OUTNUM $

        ::::::::::::::::::::
        Now, how do I make a call from the dongle and Issabel? Do you have a knowledge of this? TK

          emendoza You can add extension in issabel, and use softphone for making calls. For example Zoiper for android or X-Lite for Windows. You have to input your VM ip, extension number and password in softphone settings.

          Hello Everyone,

          Is there any solution like Script ose Web GUI, for receiving and senning the SMS?

          Thanks in advance

          ggrraay , Yesterday was a day of great experience with linux, Issabel and Dongle. Many thanks to Issabel's team. I'm made to order by skype: emendoza.doyma. My native language is Spanish, and by google translate I can use English.
          Yesterday for some reason my Issabel NOT started correctly when creating the extensions, the users and testing the softphones. Apparently the reason was when I connected the microphones. My server could not start and I decided to install Issabel and the chan dongle again.
          I have everything running correctly, I can make and receive calls from softphone to the extensions created. But I only need my, make and receive GSM calls from the dongle Huawei e1752. My dongle is made and received with the Mobile Partner application. But I need to make the calls with the softphones and Issabel. Is this possible @ggrraay? Have you had any experience in GSM calls with Issabel and DONGLE GSM 3G?

          MTF Hi, maybe I can help with your request. I'm available by skype live: emendoza.doyma

          • MTF replied to this.

            emendoza You have to create an outbound route in issabel and specify there trunk with chan_dongle. Then just dial phone number on softphone.

              emendoza

              I just got the dongle stick Working did, Local/$OUTNUM$@dongle-dialout. now i am not able to receive incomming calls.

                21 days later

                emendoza I'm sorry to hijack the post but where did you put the custom dial string in issabel?. I've looking everywhere and I can't seem to find that specific option.
                Thanks

                9 months later

                Please I Wanna Steps to configure Hawaii Dongle on Issabel & Asterisk 11 & as im new on issabel .

                  7 months later
                  5 months later
                  4 months later

                  chan_dongle.c:218 opentty: unable to open / dev/ttyUSB5: Permission denied

                    tarek, To fix it, please put line
                    KERNEL=="ttyUSB*", MODE="0666", OWNER="asterisk", GROUP="dialout"
                    to the file /etc/udev/rules.d/92-dongle.rules
                    and reboot the server

                      /etc/udev/rules.d/92-dongle.rules: No such file or directory

                      [2021-01-30 12:40:03] WARNING[2877]: chan_dongle.c:218 opentty: unable to open /dev/ttyUSB2: Permission denied
                      -- [dongle1] Trying to connect on /dev/ttyUSB5...
                      [2021-01-30 12:40:03] WARNING[2877]: chan_dongle.c:218 opentty: unable to open /dev/ttyUSB5: Permission denied
                      -- [dongle2] Trying to connect on /dev/ttyUSB8...
                      [2021-01-30 12:40:03] WARNING[2877]: chan_dongle.c:218 opentty: unable to open /dev/ttyUSB8: Permission denied
                      -- [dongle0] Trying to connect on /dev/ttyUSB2...
                      [2021-01-30 12:40:18] WARNING[2877]: chan_dongle.c:218 opentty: unable to open /dev/ttyUSB2: Permission denied
                      -- [dongle1] Trying to connect on /dev/ttyUSB5...
                      [2021-01-30 12:40:18] WARNING[2877]: chan_dongle.c:218 opentty: unable to open /dev/ttyUSB5: Permission denied
                      -- [dongle2] Trying to connect on /dev/ttyUSB8...
                      [2021-01-30 12:40:18] WARNING[2877]: chan_dongle.c:218 opentty: unable to open /dev/ttyUSB8: Permission denied

                        Bad credentials