Hola amigos, les comento estoy tratando de levantar mi central PBX con el servicio de Sip Trunk de Claro Colombia, tengo problemas al registrar Trunk - Outbound - Inbound.
Claro Colombia me entrega los siguientes Datos;
IP de Planta = 10.11.111.238
IP de Gateway = 10.11.111.237
Mascara = 255.255.255.252
IP Peer = 10.11.0.9
Siguiendo pasos que encontré por internet logre configurar la red de mi servidor Issabel 4, comento tengo una VM con dos interfaces ethernet Eth0 con la red LAN y Eth1 con la red que me entrega Claro Colombia.
Configure la Eth1 con los siguientes datos;
DEVICE=eth1
BOOTPROTO=static
ONBOOT=yes
TYPE=Ethernet
IPADDR=10.11.111.238
NETMASK=255.255.255.252
NOZEROCONF=yes
BROADCAST=10.11.111.239
NETWORK=10.11.111.236
GATEWAY=10.11.111.237
Realizo ping al Gateway; 10.11.111.237
PING 10.11.111.237 (10.11.111.237) 56(84) bytes of data.
64 bytes from 10.11.111.237: icmp_seq=1 ttl=254 time=0.583 ms
64 bytes from 10.11.111.237: icmp_seq=2 ttl=254 time=0.510 ms
64 bytes from 10.11.111.237: icmp_seq=3 ttl=254 time=0.473 ms
64 bytes from 10.11.111.237: icmp_seq=4 ttl=254 time=0.526 ms
64 bytes from 10.11.111.237: icmp_seq=5 ttl=254 time=0.474 ms
--- 10.11.111.237 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 3999ms
rtt min/avg/max/mdev = 0.473/0.513/0.583/0.042 ms
Realizo ping a; 10.11.0.9
PING 10.11.0.9 (10.11.0.9) 56(84) bytes of data.
64 bytes from 10.11.0.9: icmp_seq=1 ttl=60 time=2.59 ms
64 bytes from 10.11.0.9: icmp_seq=2 ttl=60 time=2.16 ms
64 bytes from 10.11.0.9: icmp_seq=3 ttl=60 time=2.37 ms
64 bytes from 10.11.0.9: icmp_seq=4 ttl=60 time=2.35 ms
64 bytes from 10.11.0.9: icmp_seq=5 ttl=60 time=2.35 ms
64 bytes from 10.11.0.9: icmp_seq=6 ttl=60 time=1.96 ms
--- 10.11.0.9 ping statistics ---
6 packets transmitted, 6 received, 0% packet loss, time 5005ms
rtt min/avg/max/mdev = 1.961/2.300/2.599/0.197 ms
Me gustaría saber como debo configurar de la forma correcta Issabel en la parte de Trunk - Outbound - Inbound.
Gracias.