Good afternoon everyone,
I'm from Brazil and I'm trying to configure Digium's TE110P board on ISSABEL 4.0.
In the plate detector it is detected, in dahdi_tools it appears normal. But I cannot originate and receive calls.
My digital E1 R2 link
I followed the same guidelines as the Elatix 2.3 settings.
- The plate recognizes in the plate detector;
/etc/dahdi/system.conf
span=1,1.0,cas,hdb3
cas=1-15:1101
#dchan=16
cas=17-31:1101
echocanceller=OSLEC,1-31
loadzone = br
defaultzone=us
/etc/asterisk/chan_dahdi.conf
[channels]
language=br
usecallerid=yes
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancelforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
faxdetect=incoming
signaling=mfcr2
mfcr2_variant=br
mfcr2_get_ani_first=no
mfcr2_max_ani=11
mfcr2_max_dnis=4
mfcr2_category=national_subscriber
mfcr2_logdir=span1
mfcr2_call_files=yes
mfcr2_logging=all
mfcr2_mfback_timeout=-1
mfcr2_metering_pulse_timeout=-1
mfcr2_allow_collect_calls=no
mfcr2_double_answer=yes
mfcr2_immediate_accept=no
mfcr2_forced_release=yes
mfcr2_charge_calls=yes
rxgain=5.0
txgain=5.0
context=from-pstn
group=0
channel=>1-15,17-31
