si claro, verifique solo creando el archivo PHP pero seguia igual, lo unico diferente que se realizo fue;
EN EL MANAGER.CONF
; AMI - Asterisk Manager interface
;
; IssabelPBX needs this to be enabled. Note that if you enable it on a different IP, you need
; to assure that this can't be reached from un-authorized hosts with the ACL settings (permit/deny).
; Also, remember to configure non-default port or IP-addresses in amportal.conf.
;
; The AMI connection is used both by the portal and the operator's panel in IssabelPBX.
;
; IssabelPBX assumes an AMI connection to localhost:5038 by default.
;
[general]
enabled = yes
bindaddr = 0.0.0.0
port = 5038
#include manager_general_additional.conf
[admin]
secret = Itc@Spbx@7193
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read = system,call,log,verbose,command,agent,user,config,command,dtmf,reporting,cdr,dialplan,originate
write = system,call,log,verbose,command,agent,user,config,command,dtmf,reporting,cdr,dialplan,originate
writetimeout = 5000
[admin]
secret = Itc@Spbx@7193
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read = system,call,log,verbose,command,agent,user,config,command,dtmf,reporting,cdr,dialplan,originate
write = system,call,log,verbose,command,agent,user,config,command,dtmf,reporting,cdr,dialplan,originate
writetimeout = 5000
#include manager_additional.conf
#include manager_custom.conf
Y en el MANAGER.CUSTOM.CONF esto;
[phpconfig]
secret = php[onfig
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read = system,call,log,verbose,command,agent,user,config,dtmf,reporting,cdr,dialplan
write = system,call,log,verbose,command,agent,user,config,command,reporting,originate
[phpagi]
secret = phpagi
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read = system,call,log,verbose,command,agent,user,config,dtmf,reporting,cdr,dialplan
write = system,call,log,verbose,command,agent,user,config,command,reporting,originate
[AstTapi]
secret = AstTapi
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read = system,call,log,verbose,command,agent,user
write = system,call,log,verbose,command,agent,user
[a2billinguser]
secret=a2billing
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read = system,call,log,verbose,command,agent,user,config,dtmf,reporting,cdr,dialplan
write = system,call,log,verbose,command,agent,user,config,command,reporting,originate
[remote_mgr]
secret=0chanc3yo
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read=system,call,log,verbose,command,agent,user
write=system,call,log,verbose,command,agent,user
[fop2]
secret=qkASoLOoLXkOYjGVQZzA
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read=all
write=all
writetimeout=1000
eventfilter=!Event: RTCP*
eventfilter=!Event: VarSet
eventfilter=!Event: Cdr
eventfilter=!Event: AGIExec
eventfilter=!Event: ExtensionStatus
eventfilter=!Event: ChannelUpdate
eventfilter=!Event: ChallengeSent
eventfilter=!Event: SuccessfulAuth
eventfilter=!Event: HangupRequest
eventfilter=!Event: SoftHangupRequest
eventfilter=!Event: MusicOnHold
eventfilter=!Event: LocalBridge
[phpconfig]
secret = php[onfiguser
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read = system,call,log,verbose,command,agent,user,config,dtmf,reporting,cdr,dialplan
write = system,call,log,verbose,command,agent,user,config,command,reporting,originate
[php]
secret = php
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read = system,call,log,verbose,command,agent,user,config,dtmf,reporting,cdr,dialplan
write = system,call,log,verbose,command,agent,user,config,command,reporting,originate
tal cual a los agentes no se les volvio a a quedar sin recibir llamadas que lo hacia aleatoriamente ya llevo varios dias sin reiniciar el servidor y operando continumanente.
si hay algo por corregir dejarmelos saber MIL GRACIAS
