I am having some issues I believe are related to CNG from a Cisco ATA 186
Tengo problemas relacionado con CNG de un cisco ATA 186
Can someone help me to understand?
Alguien me puede ayudar?
el manual dice:
The manual says:
AudioMode
Description
This parameter represents the audio operating mode. The lower 16 bits are for the Phone 1 port, and the upper 16 bits are for the Phone 2 port. Table 5-4 provides definitions for each bit.
Value Type
Bitmap
Default
0x00150015
Voice Configuration Menu Access Code
312 (this is equally cryptic - es igual de misterioso)
Table 5-4 AudioMode Parameter Bit Definitions
Bit Number
Definition
0 and 16
0/1—Disable/enable G.711 silence suppression.
Default: 1
1 and 17
0—Enable selected low-bit-rate codec in addition to G.711.
1—Enable G.711 only.
Default: 0
2 and 18
0/1—Disable/enable fax CED tone detection.
Default: 1
3 and 19
Reserved.
4-5 and 20-21
tmfMethod
0—Always in-band (send and receive, do not send SDP info)
1—By negotiation (send SDP info, enable receive, decode others' SDP information, send depends on others' SDP information)
2—Always out-of-band (send SDP info, enable receive, decode others' SDP information, always send).
3—Reserved.
6-15 and 22-31
Reserved.
