Instalé Issabel con Servicio de E1 con una Tarjeta Digium TE122 al momento de correr el Hardware Detector me arroja los siguientes valores en el archivo system.conf:
Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER) CCS/HDB3/CRC4 ClockSource
span=1,1,0,ccs,hdb3,crc4
termtype: te
bchan=1-15,17-31
dchan=16
echocanceller=oslec,1-15,17-31
Global data
loadzone = us
defaultzone = us
Los datos que me da el TELCO solo son los siguientes (Es Axtel en México):
Origen del Reloj.- el pbx tiene que estar como esclavo
SEÑALIZACION MFCR2
LINECODE.- HDB3
Signaling Mode: BITORIENTED
CRC.- NOCRC
Este es mi archivo chan_dahdi.conf
; Auto-generated by /usr/sbin/hardware_detector
[trunkgroups]
[channels]
context=from-pstn
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
relaxdtmf=yes
;Uncomment these lines if you have problems with the disconection of your analog lines
;busydetect=yes
;busycount=3
immediate=no
#include dahdi-channels.conf
#include chan_dahdi_additional.conf
Y este mi dahdi-channels.conf
; Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER) CCS/HDB3/CRC4 ClockSource
group=0,11
context=from-pstn
switchtype = euroisdn
signalling = pri_cpe
channel => 1-15,17-31
context = default
group = 63
Ya intenté por todos los medios realizar alguna llamada y no he podido, me marca que todas las líneas se encuentran ocupadas. Alguien que pueda ayudarme o darme un tip. Muchas gracias de antemano.