Hola a todos, tambien soy nueva en este tema y he leido casi todo el foro, pero tengo una duda, esta es la info que me ha dado Claro:
IP Peer: 10.11.2.2
IP Planta: 10.11.225.246
GW: 10.11.225.245
Mask: /30
IP Trunk 10.11.0.9
En mi maquina tengo configurado:
Eth0 --- Red Local 192.168.0.11
Eth1 --- Red Claro
Hago ping al GW de Claro y me responde perfecto
root@issabel ~]# ping 10.11.225.245
PING 10.11.225.245 (10.11.225.245) 56(84) bytes of data.
64 bytes from 10.11.225.245: icmp_seq=1 ttl=255 time=0.127 ms
64 bytes from 10.11.225.245: icmp_seq=2 ttl=255 time=0.119 ms
64 bytes from 10.11.225.245: icmp_seq=3 ttl=255 time=0.120 ms
64 bytes from 10.11.225.245: icmp_seq=4 ttl=255 time=0.123 ms
64 bytes from 10.11.225.245: icmp_seq=5 ttl=255 time=0.105 ms
C
--- 10.11.225.245 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4000m
Cuando realizó ping a IP Peer, no me responde, ahí es donde debo hacer una ruta estatica en mi servidor, para que cuando vaya a buscar esa IP Peer salga por la eth1?
[root@issabel ~]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.0.3 0.0.0.0 UG 100 0 0 eth0
0.0.0.0 10.11.225.245 0.0.0.0 UG 101 0 0 eth1
10.11.225.244 0.0.0.0 255.255.255.252 U 101 0 0 eth1
192.168.0.0 0.0.0.0 255.255.255.0 U 100 0 0 eth0
[root@issabel ~]#
Gracias por su ayuda.