Hola a todos,
Ayer instale Issabel 4 sobre un Centos 7. Le puse una OpenVox DE230E con 2 puertos para recibir 2 E1s.
Al instalar la tarjeta, no me la detecto el 'hardware detector' asi que baje e instale dahdi desde aquí:
http://downloads.openvox.cn/pub/drivers/dahdi-linux-complete/openvox_dahdi-linux-complete-current.tar.gz
Y el ultimo Libpri desde aquí:
http://downloads.asterisk.org/pub/telephony/libpri/
Ahora si me lo reconoce el 'hardware detector'... todo bien.
Al configurar y conectar un E1 en el span 1 todo va bien.
Pero al conectar el mismo E1 al span 2 (aun no recibo el E1 del otro proveedor) solo tengo una Yellow alarm y no hay lineas.
Aqui mi system.conf
#Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
span=1,1,0,ccs,hdb3,crc4
#termtype: te
bchan=1-15,17-31
dchan=16
echocanceller=oslec,1-15,17-31
#Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
span=2,2,0,ccs,hdb3,crc4
#termtype: te
bchan=32-46,48-62
dchan=47
#echocanceller=oslec,32-46,48-62
Ya probe con 'span=2,1,0...' y lo mismo.....
Alguien tiene una idea? Muchas gracias.